2MILA 15313-003
- Chemical Family
- PolyethylenesPolyolefins
2MILA 15313-003 is intended for manufacture of thin films and film products, shrinkable films, films for food contact (including air - tight packing), general purpose films, bags and packages. To be used for covering the articles allowed for food contact, for manufacture of pipes and fittings allowed for cold domestic water supply.
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
- Consumer Goods — Sports & Recreation
- Greenhouse & Tunnel Films
- Pipes & Hoses
- Pipes & Plumbing
- Food & Beverage Packaging
- Healthcare Packaging
- Industrial & Transport Packaging
Product Families
- Polyolefins
Other characteristics
- Polymer Name
- Low Density Polyethylene (LDPE)
- Processing Methods
- Extrusion, Film Extrusion
- Markets
- Agriculture & Feed
- Building & Construction
- Consumer Goods
- Printing & Packaging
- Storage
Polyethylene shall be stored in enclosed dry space preventing from direct sunlight on shelves or pallets at least 5 cm from the floor and at least 1m from heaters, at a temperature max 30°C, relative humidity max 80%. Prior to processing bags with polymer shall be kept in production are for at least 12 hrs.
- Technology
- Plastics
- Packaging Type
- Bags
- Labeling Claims
- Food Contact Acceptable
- Material Features
- Food Contact Acceptable
- General Purpose
- Packing and Supply Form
Supply form: Pallets Packing: Product is packed in polyethylene bags (one bag net weight 25.00 ±0,25kg) and stacked on flat pallets with shrink film. Maximum gross weight of a bundle is 2 tons. Transport: by all modes of transport.
- Certifications and Compliance
- ISO 9001
- Plastics and Elastomers End Uses
- Film
- Fittings
- Food Packaging
- Greenhouse Film
- Medical Packaging
- Pipes
- Shrink Wrap
- Toys
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Extrusion
- Film Extrusion
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Density | 0.9205 ± 0.0015 | g/cm3 |
| Melt Flow Index ((Nominal Value) With A Tolerance),%, G/10 Min | 0.3 ± 30 | %/g/10 min |
| Melt Flow Index Spread Within A Batch | max. ± 6 | % |
| Number of Inclusions | max. 2 | pcs |
| Stress Cracking Resistance | min. 500 | hours |
| Tensile Yield Strength | min. 9.8 | MPa |
| Rupture Strength | min. 13.7 | % |
| Elongation at Break | min. 600 | % |
