To catalogue
MD Graphene DURA ABS Blue Pellets
- Chemical Family
- Acrylonitrile Butadiene Styrene (ABS)
MD Graphene DURA ABS Blue Pellets are made up of Acrylonitrile-Butadiene-Styrene graphene oxide reinforced, they are anti-bacterial and high temperature resistant. It is the first choice of material for demanding healthcare applications, as well as for medical applications requiring structural stability and high agility.
Properties
- Physical Form
- Pellets
- Solid
Product families
Plastics — Basic Thermoplastics
- Styrenics
Other characteristics
- Polymer Name
- Acrylonitrile Butadiene Styrene (ABS)
- Fillers Included
- Graphene Oxide
- Processing Methods
- Extrusion, Injection Molding
- Color
- Blue
- Markets
- Electrical & Electronics
- Healthcare & Pharma
- Printing & Packaging
- Technology
- Plastics
- Material Features
- Bacteria Resistant
- Deformation Resistant
- Detergent Resistant
- Dimensional Stability
- Fungus Resistant
- Good Abrasion Resistance
- Good Grease Resistance
- Good Heat Dissipation
- Use Recommendation
- Processing temperature range
- 260-310 °C. The processing temperature is directly related to the printing speed. The faster the processing speed is, the higher the temperature of the print fuser should be.
- Recommended bed temperature
- 90-100 °C. If the adherence to the building platform is weak, it is recommended to use products to improve the adherence between the piece and the machine.
- Layer fan speed
- 0%.
- Heated chamber temperature
- not necessary (if available, use it at more than 45°C). It is advisable to use totally closed printers to prevent internal stresses produced by the cooling of the parts from causing undesired breakage or deformation.
- Drying conditions
- 80°C for at least 4 hours. Drying of the material is recommended if signs of moisture are detected in the print.
- Printing speed
- 30-60 mm/s. This parameter will depend on the final quality that is expected to be achieved as well as the stability of the printing machine itself.
- Nozzle size
- 0.4-0.6 mm. To prevent excessive wear of the extrusion components, special hardened or stainless steel nozzles should be used.
- Due to the reinforcement found in the material itself, this can lead to nozzle clogging. To eliminate this problem, the filament shrinkage must be used cautiously, even to the point of eliminating it. Place the filament in the sealed bag with the built-in desiccant after each use.
- Certifications and Compliance
- EC No.1907/2006
- ISO 10993
- USP Class VI
- Plastics and Elastomers End Uses
- Dispensers
- Medical Device Housings
- Medical/Healthcare Applications
- Medicine Containers
- Pharmaceutical Packaging
- Pillboxes
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Bulk Density | approx. 1.8 | g/cm³ |
| Flake Size | 5 - 100 | µm |
| Layer Fan Speed | 0.0 | % |
| Nozzle Size | 0.4 - 0.6 | mm |
| Number of layers | 4 - 16 | — |
| Oxidation | 3.1:1 | — |
| Printing Speed | 30 - 60 | mm/s |
| Processing Temperature Range | 260 - 310 | °C |
| Recommended Bed Temperature | 90 - 100 | °C |
