MD Graphene DURA PEEK Pellets
- Chemical Family
- Polyether Ether Ketone (PEEK)
MD Graphene DURA PEEK Pellets incorporate a graphene oxide reinforcement with exceptional chemical resistance. DURA PEEK polymer provides long-term performance up to 255°C. This material provides long-term performance up to 240°C, with exceptional chemical resistance, excellent wear, and abrasion resistance.
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
- Equipment & Parts
- Medical Devices & Assemblies
- Aerospace & Aviation
Product Families
- High Performance Thermoplastics
Other characteristics
- Polymer Name
- Polyetheretherketone (PEEK)
- Fillers Included
- Graphene Oxide
- Processing Methods
- 3D Printing
- Markets
- Automotive & Transportation
- Healthcare & Pharma
- Industrial
- Shelf LIfe
- 5 years
- Technology
- Plastics
- Labeling Claims
- Food Contact Acceptable
- Material Features
- Abrasion Resistant
- Chemical Resistant
- Detergent Resistant
- Food Contact Acceptable
- Fungus Resistant
- Good Weather Stability
- High Performance
- Mildew Resistant
- Storage Condition
Store with desiccant in a cool, dry place. Keep container tightly closed in a dry and well-ventilated place away from sources of ignition and oxidizers. Keep away from heat, sparks, flame, and other sources of ignition. Store in accordance with the national regulations.
- General Description
Graphene oxide is a material belonging to the family of graphene-based materials (GBM). We offer a fully characterized product with well-defined properties and high-quality standards aimed to help researchers of different fields to obtain reproducibility and replicability on their results and boost the outstanding potential of this material.
- Material Properties
Graphene-based material additives (GBMs) enhance:; Inhibit the growth of algae, fungi, and mold; Increases abrasion resistance and good weathering; Resistance to lipids, cleaning and disinfectant agents
- Use Recommendation
Drying conditions: 150 ° C for at least 4 hours; Place the filament in the sealed bag with the desiccant that comes with it after each use.
- Certifications and Compliance
- FDA 21 CFR Regulations
- ISO 10993
- Regulation (EU) No. 10/2011 (PIM)
- USP Class VI
- Plastics and Elastomers End Uses
- Aerospace Applications
- Industrial Applications
- Medical Devices
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- 3D Printing
Technical data
Table 1 of 4
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Elongation at Break | 150 - 154 | MPa | ISO 527 |
| Elongation at Yield | 4.8 - 5.2 | % | ISO 527 |
| Tensile Modulus | 3.4 - 3.8 | Gpa | ISO 527 |
| Tensile Strength | 89 - 103 | MPa | ISO 527 |
Table 2 of 4
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Bulk Density | approx. 1.8 | g/cm³ | — |
| Flake Size | 5 - 100 | µm | — |
| Number of layers | 4 - 16 | — | — |
| Oxidation | 3.1:1 | — | — |
| Processing Temperature Range | 390 - 420 | °C | — |
| Recommended Bed Temperature | min. 200 | °C | — |
| Hardness | 81 - 81.4 | — | Supplier’s method |
| Specific Gravity | 1.3 - 1.7 | g/cm3 | ASTM D792 |
Table 3 of 4
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Glass Transition Temperature | 145 - 155 | °C | Supplier’s method |
| Injection Molding-melt Temperature | 320 - 360 | °C | Supplier’s method |
| Melt Flow | 2.8 - 3.2 | g/10 min | Supplier’s method |
| Softening Temperature VICAT | 94 - 104 | °C | Supplier’s method |
Table 4 of 4
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Diameter | 1.5 - 2.5 | mm | Manual measuring with Digital Caliper 0-100mm/0-4’’ |
| Thickness | 3 - 4 | mm | Manual measuring with Digital Caliper 0-100mm/0-4’’ |
