To catalogue
MD Graphene ABV PEEK Pellets
- Chemical Family
- Polyether Ether Ketone (PEEK)
MD Graphene ABV PEEK Pellets are reinforced with silver particles on Graphene Oxide (GO-Ag) and show exceptional resistance combined with a powerful antimicrobial. It is the first choice material for demanding healthcare applications, it incorporates graphite oxide reinforcement with silver particles. The ABV PEEK polymer provides long-term performance up to 255°C, with exceptional chemical resistance, and high resistance to wear and abrasion.
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
Healthcare & Pharma — Medical
- Medical Devices & Assemblies
Electrical & Electronics — Parts & Components
- Housings & Enclosures
Product Families
Plastics — Engineering & Specialty Polymers
- High Performance Thermoplastics
Other characteristics
- Polymer Name
- Polyetheretherketone (PEEK)
- Fillers Included
- Graphene Oxide, Silver
- Graphene Oxide
- Silver
- Processing Methods
- 3D Printing
- Markets
- Electrical & Electronics
- Healthcare & Pharma
- Technology
- Plastics
- Labeling Claims
- Food Contact Acceptable
- Material Features
- Abrasion Resistant
- Bacteria Resistant
- Chemical Resistant
- Detergent Resistant
- Food Contact Acceptable
- Fungus Resistant
- Good Weather Stability
- High Performance
- Material Properties
Graphite-based material additives (GBMs) enhance the following properties:; ABV PEEK contains GO-Ag, a powerful antibacterial, and antiviral. It inhibits the growth of algae, fungi, and mold.; Increases abrasion resistance and good weathering; Resistance to lipids, cleaning and disinfectant agents
- Use Recommendation
- Drying conditions
- 150 °C for at least 4 hours
- Nozzle size
- 0.4 - 0.6 mm To prevent excessive wear on extrusion components, special hardened or stainless steel nozzles should be used.
- Place the filament in the sealed bag with the desiccant that comes incorporated after each use.
- Certifications and Compliance
- FDA 21 CFR Regulations
- ISO 10993
- Regulation (EU) No. 10/2011 (PIM)
- USP Class VI
- Plastics and Elastomers End Uses
- Medical Device Housings
- Medical Devices
- Medical/Healthcare Applications
- Respiratory Devices
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- 3D Printing
Technical data
Table 1 of 1
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Nozzle Size | 0.4 - 0.6 | mm |
| Processing Temperature Range | 390 - 420 | °C |
| Recommended Bed Temperature | min. 200 | °C |
