UCECOAT® 7510
UCECOAT® 7510, a white translucent liquid, stands out as the perfect coating option for wood surfaces. Designed specifically for wood coatings and finishes, this cutting-edge product's low-temperature curing function guarantees a quicker cycle time. UCECOAT® 7510, with its extended pot life and low energy usage, is the ideal combination of qualities for industrial coatings. It is an adaptable option for coil coatings and other industrial coatings applications due to its compatibility with wood substrates.
Properties
- Physical Form
- Liquid
Identification
- Chemical Family
- Acrylics & Acrylates, Calcium Salts, Polyurethanes (PU)Acrylics & AcrylatesCalcium SaltsPolyurethanes (PU)
- CASE Ingredients Features
- Faster Cycle TimeGood Balance of PropertiesLong PotlifeLow Energy ConsumptionLow Temperature-Curing
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Wood Coatings & Finishes
- Coil Coatings
- Industrial Coatings
Product Families
- Polyurethanes (PU)
Other characteristics
- Brand
- UCECOAT
- End Uses
- Radiation Curable Coating, Waterborne Coating
- Features
Faster Cycle Time, Good Balance of Properties, Long Potlife, Low Energy Consumption, Low Temperature-Curing
- Synonyms
Basic calcium sulfate, Calcium sulfate (CaSO4), Calcium sulphate, Sulfuric acid calcium salt, Sulfuric acid calcium(2+) salt (1:1)
- Compatible Substrates & Surfaces
- Wood
- Markets
- Paints & Coatings
- Appearance
- White translucent liquid
- Cure
- Radiation Cure
- Precaution
Before using UCECOAT 7510, see the Safety Data Sheet for information on the identified hazards of the material and the recommended personal protective equipment and procedures.
- Coating Type
- Radiation Curable Coating
- Waterborne Coating
- Technology
- CASE Ingredients
- Labeling Claims
- Solvent-free
- Tin-free
- VOC-free
- Country Availability
- Brazil
- Canada
- China (Mainland)
- Mexico
- USA
- Storage and Handling
Protect the product from freezing. Care should be taken not to expose the product to high temperature conditions or direct sunlight. Containers should be kept closed and away from materials that react with water. Bacteriological contamination can occur if the product is stored for an extended period in a container which is not sufficiently sealed or clean. Storage and handling should be in stainless steel, amber glass, or amber polyethylene containers. After prolonged storage product can settle and may require agitation to re-disperse. This product is stable under normal conditions of handling and storage. Do not store this material under an oxygen free atmosphere. Wash thoroughly after handling. Use with adequate ventilation.. See the SDS for the recommended storage temperature range for UCECOAT 7510.
- Performance Highlights
UCECOAT 7510 is characterized by:; Low yellowing on cure; Excellent cost/performance balance; Excellent cold check resistance; UV/EB cured properties of coatings based on UCECOAT 7510 are characterized by the following performance properties:; Excellent drying properties; Nearly tack free after physical drying; Outstanding hardness, high reactivity; Good chemical and stain resistance; The actual properties of UV/EB cured products also depend on the selection of other formulation components such as reactive diluents, additives and photoinitiators.
- Compatible Substrates and Surfaces
- Wood
Technical data
Table 1 of 2
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Particle Size | max. 150 | nm |
| Solids Content | approx. 40 | wt% |
| Density (25°C) | approx. 1.1 | g/ml |
| pH Value | 6.5-8 | — |
| Viscosity (25°C) | max. 200 | cP/mPa·s |
Table 2 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Elongation at Break | 0.5 | % |
| Koenig hardness (on glass) | 175 | sec |
| Tensile Strength | 1030 (7.1) | psi (MPa) |
| Young's Modulus | 210305 (1450) | psi (MPa) |
