SETAQUA® ECO 2015
- CASE Ingredients Features
- Good Balance of PropertiesLow Odor
- Chemical Family
- Acrylics & Acrylates
SETAQUA® ECO 2015. This liquid formulation has a low odor and a milky white emulsion look. It has a nice balance of properties. SETAQUA® ECO 2015 is especially made for decorative paints used in building envelopes and roofing, as well as exterior insulation and finish systems (EIFS). It is a versatile and dependable product. Use this emulsion to improve your aqueous coatings, guaranteeing little environmental impact and excellent performance. For coatings that not only meet but also surpass expectations and produce remarkable outcomes in the demanding building and construction industry, use SETAQUA® ECO 2015.
Properties
- Physical Form
- Emulsion
- Liquid
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Decorative Paints
- EIFS & Insulation
Product Families
- Acrylics
Other characteristics
- Brand
- SETAQUA
- End Uses
- Waterborne Coating
- Features
- Good Balance of Properties, Low Odor
- Markets
- Building & Construction
- Paints & Coatings
- Appearance
- Milky White Emulsion
- Shelf LIfe
- 12 Months
- Coating Type
- Waterborne Coating
- Technology
- CASE Ingredients
- Labeling Claims
- APEO-Free
- Low VOC
- Storage and Handling
SETAQUA® ECO 2015 should be stored under cover, out of direct sunlight and avoiding extreme temperature changes. Under normal storage conditions (5−35°C, away from extremes) sealed, unopened containers of this material would have a shelf life of 12 months from the date of manufacture. If stored for longer than 12 months, product must be rechecked for suitability in the intended application.
- Known For
SETAQUA® ECO 2015 has been specifically developed for environmentally friendly broad wall paint applications where excellent film performance is required. It is recommended for low-sheen coatings and flat paints, where it imparts good scrub and stain resistance.
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Free Monomer Content | max. 0.025 | %wt |
| Particle Charge | Anionic | — |
| Brookfield Viscosity (RVT3/50) | 700 | cPa.s |
| Solid Content | 50 | %wt |
| Specific Gravity | 1.04 | — |
| Particle Size (median) | 0.12 | μm |
| Minimum Film Forming Temperature | 0 | °C |
| pH Value (25°C) | 8 | — |
