E-Seal 1002
E-Seal 1002 is a two component, high performance corrosion resistant polymer sealer that provides over 300 hours of salt spray protection to white rust and 500 hours of salt spray protection to red rust when applied over zinc plated (zinc plating thickness 0.0003") parts in E-Brite Ultra Alk or E-Brite Ultra Chlor plating baths and chromated in E-Chrome hexavalent or E-PASSivate trivalent chromates. E-Seal 1002-A and E-Seal 1002-B are concentrated liquids that are diluted to 10-40% by volume with tap water.
Properties
- Physical Form
- Liquid
Product families
Applications
- Paints & Coatings — Other Paints & Coatings Applications
- Industrial Coatings
Product Families
- Primers & Sealers
Other characteristics
- Brand
- E-Seal
- Features
Corrosion Resistant, Excellent Performance, Excellent Salt Spray Resistance
- Product Type
- 2K (2 component) Coating, Sealer
- 2K (2 component) Coating
- Sealer
- Caution
This material is alkaline. Do not get in eyes, on skin or on clothing. Do not breathe mists. Do not take internally. When handling, wear goggles or face shield. While making up solutions, or adding to a solution, add slowly to surface of solution to avoid spattering. In case of contact immediately flush skin or eyes with plenty of water for at least 15 minutes. For eyes, call physician. Do not mix E-Seal 1002-A and E-Seal 1002-B with acidic materials or any other chemical substances.
- Markets
- Paints & Coatings
- PACKAGING
5 gallon and 55 gallon plastic, non-returnable containers. Keep lid on when not in use.
- Technology
- Ready-to-Use Products
- Technical Details
Solution Make Up Fill the tank to 1/2 of the way with water. Carefully pour E-Seal 1002 A and E-Seal 1002 B to obtain the desired concentration – avoid spattering. E-Seal 1002 A and E-Seal 1002 B are added at a 1:1 ratio. Wear safety glasses, gloves and apron. Add water to working level.; Processing Procedure 1. Zinc or cadmium plated surfaces 2. Thorough cold water rinse will prolong the life of chromate. a.) Optional 1% Sulfuric Acid to neutralize residual plating solution with barrel processed work. b.) Cold water rinse 3. Immersion in E-Chrome or E-PASSivate (see respective product data sheet). 4. Cold water rinse 5. E-Seal 1002. For optimum corrosion resistance the immersion time must be kept to a minimum. Maximum immersion time – 60 seconds. 6. Hot air dry. Optimum corrosion resistance will be obtained if the temperature of the hot air is kept below 150F for hexavalent chromates.; Analysis is by refractive index: Refractive index X 4 = % of E-Seal 1002
- HIGHLIGHTS
Sealer for Post forming High Corrosion Resistance for Zinc/Chromated Surfaces Traditional silicate seals will immediately display white corrosion in salt spray testing after a part is plated and then formed. E-Seal 1002 does not significantly change the thickness of the plated part, works over different chromate films and is utilized in the final dip. E-Seal 1002 offers self-healing properties similar to a hexavalent chromate. The end user can zinc plate a part and post form the part at a 90 degree bend. Perform salt spray. The first signs of white rust are typically 144 hours on post formed parts. Previously the white corrosion would happen in 2-24 hours. Equipment Tanks should be constructed of polypropylene, PVC, Koroseal lined carbon steel or stainless steel.
- Ready to Use Product Features
- Corrosion Resistant
- Excellent Performance
- Excellent Salt Spray Resistance
