ShieldSys™ 402 PTFE Wire Coating
- CAS Number
- 9002-84-0
- Chemical Family
- Fluoropolymers
ShieldSys™ 402 PTFE Wire Coating is a solvent-based system designed to provide robust anti-stick and wear resistance for a variety of applications and substrates. This coating adds high lubricity and low coefficient of friction properties to metal, glass, rubber, and plastic surfaces. Utilization of a specialized binding system allows for enhance durability and wear resistance. ShieldSys 402 solvent-based formulation offers accelerated drying and cure times relative to ShieldSys 815 and 520. Properly applied, it will develop a high adhesion, durable coating that excels on all insulating or conducting applications and as a dry barrier lubricant.
Properties
- Physical Form
- Dispersion
Product families
- Other Paints & Coatings
Other characteristics
- Brand
- ShieldSys
- Features
Excellent Lubricity, Good Adhesion, High Durability, Low Migration, Low Temperature Curing, Rapid Curing Speed, Rapid Drying Properties, Temperature Resistance, Wear Resistant
- Product Type
- Solventborne Coating
- Application Method
- Brush, Dip Coating, Spray
- Compatible Substrates & Surfaces
- Elastomers & Rubbers, Glass, Metal, Plastics
- Odor
- Alcoholic
- Markets
- Electrical & Electronics
- Paints & Coatings
- Benefits
- High lubricity; Anti-stick properties
- Enhance wear resistance
- Excellent adhesion to most substrates
- Non-migrating; Non-oil lubricant
- Appearance
- White
- Technology
- Ready-to-Use Products
- Available Sizes
- Quart
- Gallons
- 55 Gallon Drum
- 275 Gallon Totes
- Application Methods
- Brush
- Dip Coating
- Spray
- Processing Details
The application of ShieldSys DryFilm products fits easily into most wire or coating production facilities. The wire can be run through a dispersion bath containing one our PTFE wire coatings. Alternately, conventional spraying equipment can be used to coat your material. A heating or drying step is recommended to ensure the carrier has evaporated prior to insulation, spooling or final operation. Quick drying can be achieved by using the solvent-based products that use isopropyl alcohol like ShieldSys 402 PTFE Wire Coatings.
- Wire Drawing Lubricant
ShieldSys 402 PTFE wire coating is a high performance PTFE dispersions which extremely stable dry lubricants that form a film on the wire surface for drawing. The product can also be used as a pre-coat to enhance the total performance of your drawing lubricant systems. Die wear is minimized, and faster speeds can be obtained.
- Coating and Wire Stripping
Due to ShieldSys' unique properties they are the ideal coatings for enhancing lubricity and antistick properties on conductor or insulated wire and cable. Our PTFE Wire Coating dispersions are used to impart a thin nonstick film on metal wires as well as on insulated wire and cable products and twisted wire in jackets. Benefits include: reduce insulation stripping force, provide nonstick (abrasion resistance) to twisted wire, and a lubricant for welding wire, wire forming, and knitting.
- Ready to Use Product Features
- Excellent Lubricity
- Good Adhesion
- High Durability
- Low Migration
- Low Temperature Curing
- Rapid Curing Speed
- Rapid Drying Properties
- Temperature Resistance
- Compatible Substrates and Surfaces
- Elastomers & Rubbers
- Glass
- Metal
- Plastics
Technical data
Table 1 of 1
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Specific Gravity (25°C) | 0.83 | g/ml |
| Primary Polymer | Fluorochemical | — |
| Flash Point | 12 | °C |
