ShieldSys™ 815 Dryfilm Industrial Coating
ShieldSys™ 815 Dryfilm Industrial Coating is a high-performance water-based industrial coating designed to exhibit superior substrate adhesion and durability. When applied to a substrate, it exhibits outstanding anti-stick properties and has a very low coefficient of friction. ShieldSys 815 develops a long lasting thin-film that is clean, non-oily, non-staining and chemically inert. Allows easy removal of outer jacket on wire.
Product families
Applications
- Industrial Coatings
- Jacketing & Insulation
Product Families
- Other Paints & Coatings
Other characteristics
- Brand
- ShieldSys
- Features
Chemical Resistant, Excellent Lubricity, Fast Curing, Fast Drying, Good Adhesion, High Durability, High Performance, Low Friction, Low Odor, Low VOC, Stain Resistant, Temperature Resistance
- Product Type
- Waterborne Coating
- Application Method
- Brush, Dip Coating, Spray
- Compatible Substrates & Surfaces
- Metal
- Odor
- Slight
- Usage
ShieldSys 815 is formulated to provide unmatched utility in wire or cable jacket removal due to its high lubricity and non-stick properties
- Markets
- Electrical & Electronics
- Paints & Coatings
- Benefits
- Water-based formulation
- Superior surface adhesion and durability
- Anti-stick; low coefficient of friction
- Low VOC; Low Odor
- Fast Dry and Cure Times
- Appearance
- White Emulsion
- Shelf LIfe
ShieldSys 815 has a shelf life of 6 months from the date of shipment.
- Technology
- Ready-to-Use Products
- Labeling Claims
- Low VOC
- Available Sizes
- Quart, Gallons, Drums, and 275 Gallon Totes
- Application Methods
- Brush
- Dip Coating
- Spray
- Storage and Handling
The precautions used in handling ShieldSys 815 release coating are the same as those used in handling most coatings in industrial use. Contact with the skin should be avoided. Adequate ventilation must be provided in work areas. Breathing vapors should be avoided. If spraying, care should be taken to avoid inhaling mist or vapors, just as sprayed paint inhalation should be avoided.; Vapor may develop slight pressure. Therefore, care should be exercised when opening containers. Containers should be closed promptly after removing part of the contents to avoid evaporation.; If this product is exposed to extreme heat conditions from misuse or equipment failure, toxic decomposition products that include hydrogen fluoride can occur. Hydrogen fluoride has an ACGIH threshold limit value of 3 parts per million parts of air as a ceiling limit, an OSHA permissible exposure limit (PEL) of 3 ppm of fluoride as an 8-hr time-weighted average, and 6 ppm of fluoride as a short-term exposure limit (STEL). Always wash hands after handling ShieldSys 815 coating. Do not smoke while handling this product.
- Ready to Use Product Features
- Chemical Resistant
- Excellent Lubricity
- Fast Curing
- Fast Drying
- Good Adhesion
- High Durability
- High Performance
- Low Friction
- Compatible Substrates and Surfaces
- Metal
- Application Procedure
Dipping and Flooding – The easiest and most widely used method. A wiper system should be used to strip off excess amounts, ensuring a thin, even coating over the entire length of wire.; Spraying – Particularly effective in depositing a very thin coating with excellent adhesion. This system can be used with an automated or hand spray gun.; Wiping or Brushing – Very effective for coating small amounts of selected areas on a wire or cable.
Technical data
Table 1 of 1
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Specific Gravity (25°C) | 1.1 | g/ml |
| Primary Polymer | Fluorochemical | — |
