DAIFREE GA-3000
- Chemical Family
- Fluoropolymers
DAIFREE GA-3000 is a formulation tailored for elastomers and plastics, offering PFOA and PFOS-free mold release properties. With fluorocarbon as a key component, it ensures durable and efficient release performance. This product minimizes mold residue and stickiness by adhering to environmental standards like TSCA and RoHS. It's instrumental in industrial settings, notably in tooling and moldmaking applications. Additionally, including a degassing cap enhances safety during aerosol disposal, catering to various polymers and resins such as chloroprene rubber, epoxies, and nitrile butadiene rubber, among others.
Product families
Applications
- Tooling & Moldmaking
Product Families
- Performance Additives
- Performance Additives
Other characteristics
- Brand
- DAIFREE
- End Uses
- Electrical/Electronic Applications
- Functions
- Mold Release Agent, Release Agent
- Labeling Claims
- PFOA-free, PFOS-free
- PFOA-free
- PFOS-free
- Compatible Polymers & Resins
Chloroprene Rubber (CR), Epoxies (EP), Ethylene Propylene Diene Monomer (EPDM), Fluoroelastomer (FKM), Nitrile Butadiene Rubber (NBR), Phenolic Resins, Polyacrylate Rubber (ACM), Styrene Butadiene Rubber (SBR), Unsaturated Polyester (UPE)
- Note
The above values in properties are representative and not guaranteed.
- Markets
- Industrial
- Package Size
- 20cans / 1 carton
- Technology
- Elastomers
- Plastics
- Use Method
How to apply; Shake the can well, hold it about 20‐30cm away from the mold, and then spray lightly so that a thin uniform film is formed.; Before using the product for the first time, remove the old release agent completely. Use the steps in '(2) Cleaning the mold' below to clean correctly.; Curing process; 150°C - 180°C × 30 - 10 min.; Cleaning the mold; Slight contamination of the mold release agent can usually be removed to a certain degree by wiping with a solvent (IPA, toluene, acetone).; Alkaline cleaning agents are effective for complete removal. (Immerse in an approx.. 10% aqueous solution of potassium hydroxide or sodium hydroxide to which a small amount of surfactant has been added. The cleaning solution should be at a temperature of 60‐80°C); Use temperature range; From room temperature to 300°C
- Packaging Type
- Cans
- Cartons
- Material Features
- Good Mold Release
- Non Stick
- HIGHLIGHTS
High durable effective release performance with fluorocarbon as the principal ingredient.; PFOA and PFOS free* and complies with environmental regulations such as TSCA and RoHS. ≤5ppb detection limit.; Little transfer, no stickiness left on the mold product.; Minimal mold contamination is produced, reducing mold -cleaning requirements and improving productivity.; A degassing cap is provided so that the aerosol product can be discarded safely.
- Chemical Inventories
- TSCA (USA)
- Certifications and Compliance
- RoHS Compliant
- Compatible Polymers and Resins
- Chloroprene Rubber (CR)
- Epoxies (EP)
- Ethylene Propylene Diene Monomer (EPDM)
- Fluoroelastomer (FKM)
- Nitrile Butadiene Rubber (NBR)
- Phenolic Resins
- Polyacrylate Rubber (ACM)
- Styrene Butadiene Rubber (SBR)
- Safety Information
Be sure to read the Safety Data Sheet (SDS) and precautions on the label before using.. This product has been developed for industrial purposes and we shall not guarantee the the safety if used for any other purposes. If it is going to be used for medical or food applications, please contact us in advice.
- Plastics and Elastomers End Uses
- Electrical/Electronic Applications
- Plastics and Elastomers Functions
- Mold Release Agent
- Release Agent
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Fire Service Act | Flammable | — |
| NET | 420 | ml |
| Principal Solvent | IPA (isopropyl alcohol) | — |
| Propellant | LPG | — |
