DAIFREE GA-9700
DAIFREE GA-9700 is formulated for elastomers and plastics, providing PFOA and PFOS-free mold release capabilities. Utilizing fluorocarbon as its core ingredient, ensures effective mold release while meeting environmental standards like TSCA and RoHS. This product minimizes mold residue, enhancing productivity by reducing cleaning needs. It's apt for industrial applications, especially in the tooling and moldmaking sectors. The inclusion of a degassing cap ensures safe aerosol disposal. Additionally, it is compatible with a range of polymers and resins, including ABS, EPDM, FKM, and PVC, making it suitable for electrical and electronic applications.
Properties
- Physical Form
- Liquid
Product families
Applications
- Tooling & Moldmaking
Product Families
- Performance Additives
- Performance Additives
Other characteristics
- Brand
- DAIFREE
- End Uses
- Electrical/Electronic Applications
- Functions
- Mold Release Agent, Release Agent
- Labeling Claims
- PFOA-free, PFOS-free
- PFOA-free
- PFOS-free
- Compatible Polymers & Resins
Acrylonitrile Butadiene Styrene (ABS), Chloroprene Rubber (CR), Epoxies (EP), Ethylene Propylene Diene Monomer (EPDM), Fluoroelastomer (FKM), Nitrile Butadiene Rubber (NBR), Phenolic Resins, Polyacrylate Rubber (ACM), Polyethylenes (PE), Polypropylenes (PP), Polyvinyl Chloride (PVC), Styrene Butadiene Rubber (SBR), Unsaturated Polyester (UPE)
- Note
The above values in properties are representative and not guaranteed.
- Markets
- Industrial
- Package Size
- 20cans / 1 carton
- Technology
- Elastomers
- Plastics
- Use Method
How to apply; Shake the can well, hold it about 20‐30cm away from the mold, and then spray lightly so that a thin uniform film is formed.; Before using the product for the first time, remove the old release agent completely. Use the steps in '(2) Cleaning the mold' below to clean correctly.; Cleaning the mold; Slight contamination of the mold release agent can usually be removed to a certain degree by wiping with a solvent (IPA, toluene, acetone).; Alkaline cleaning agents are effective for complete removal. (Immerse in an approx. 10% aqueous solution of potassium hydroxide or sodium hydroxide to which a small amount of surfactant has been added. The cleaning solution should be at a temperature of 60‐80°C); Use temperature range; From room temperature to 200°C
- Packaging Type
- Cans
- Cartons
- Material Features
- Good Mold Release
- Non Stick
- HIGHLIGHTS
High effective release performance with fluorocarbon as the principal ingredient.; PFOA and PFOS free* and complies with environmental regulations such as TSCA and RoHS. ≤5ppb detection limit.; Little transfer, no stickiness left on the mold product.; Minimal mold contamination is produced, reducing mold -cleaning requirements and improving productivity.; A degassing cap is provided so that the aerosol product can be discarded safely.
- Chemical Inventories
- TSCA (USA)
- Certifications and Compliance
- RoHS Compliant
- Compatible Polymers and Resins
- Acrylonitrile Butadiene Styrene (ABS)
- Chloroprene Rubber (CR)
- Epoxies (EP)
- Ethylene Propylene Diene Monomer (EPDM)
- Fluoroelastomer (FKM)
- Nitrile Butadiene Rubber (NBR)
- Phenolic Resins
- Polyacrylate Rubber (ACM)
- Safety Information
Be sure to read the Safety Data Sheet (SDS) and precautions on the label before using.. This product has been developed for industrial purposes and we shall not guarantee the the safety if used for any other purposes. If it is going to be used for medical or food applications, please contact us in advice.
- Plastics and Elastomers End Uses
- Electrical/Electronic Applications
- Plastics and Elastomers Functions
- Mold Release Agent
- Release Agent
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Fire Service Act | Flammable | — |
| NET | 420 | ml |
| Principal Solvent | Isooctane | — |
| Propellant | LPG | — |
