DAIFREE GA-9700M
DAIFREE GA-9700M is tailored for elastomers and plastics, ensuring PFOA and PFOS-free mold release. With a core ingredient of fluorocarbon, it guarantees efficient mold release while adhering to environmental standards like TSCA and RoHS. Designed for industrial applications such as chemical manufacturing and tooling, it minimizes residue and reduces cleaning demands. This liquid-form product is compatible with various polymers like ABS, EPDM, FKM, and PVC, making it ideal for electrical and electronic applications.
Properties
- Physical Form
- Liquid
Product families
Applications
- Tooling & Moldmaking
Product Families
- Performance Additives
- Performance Additives
Other characteristics
- Brand
- DAIFREE
- End Uses
- Electrical/Electronic Applications
- Functions
- Mold Release Agent, Release Agent
- Labeling Claims
- PFOA-free, PFOS-free
- PFOA-free
- PFOS-free
- Compatible Polymers & Resins
Acrylonitrile Butadiene Styrene (ABS), Chloroprene Rubber (CR), Epoxies (EP), Ethylene Propylene Diene Monomer (EPDM), Fluoroelastomer (FKM), Nitrile Butadiene Rubber (NBR), Phenolic Resins, Polyacrylate Rubber (ACM), Polyethylenes (PE), Polypropylenes (PP), Polyvinyl Chloride (PVC), Styrene Butadiene Rubber (SBR), Unsaturated Polyester (UPE)
- Note
The above values in properties are representative and not guaranteed.
- Markets
- Industrial
- Package Size
- 20cans / 1 carton
- Aerosol can
- Technology
- Elastomers
- Plastics
- Use Method
How to apply; Shake the can well, hold it about 20‐30cm away from the mold, and then spray lightly so that a thin uniform film is formed.; Before using the product for the first time, remove the old release agent completely. Use the steps in '(2) Cleaning the mold' below to clean correctly.; Cleaning the mold; Slight contamination of the mold release agent can usually be removed to a certain degree by wiping with a solvent (IPA, toluene, acetone).; Alkaline cleaning agents are effective for complete removal. (Immerse in an approx. 10% aqueous solution of potassium hydroxide or sodium hydroxide to which a small amount of surfactant has been added. The cleaning solution should be at a temperature of 60‐80°C); Use temperature range; From room temperature to 200°C
- Packaging Type
- Cans
- Cartons
- Material Features
- Good Mold Release
- Non Stick
- Chemical Inventories
- TSCA (USA)
- Certifications and Compliance
- RoHS Compliant
- Compatible Polymers and Resins
- Acrylonitrile Butadiene Styrene (ABS)
- Chloroprene Rubber (CR)
- Epoxies (EP)
- Ethylene Propylene Diene Monomer (EPDM)
- Fluoroelastomer (FKM)
- Nitrile Butadiene Rubber (NBR)
- Phenolic Resins
- Polyacrylate Rubber (ACM)
- Safety Information
Be sure to read the Safety Data Sheet (SDS) and precautions on the label before using.. This product has been developed for industrial purposes and we shall not guarantee the the safety if used for any other purposes. If it is going to be used for medical or food applications, please contact us in advice.
- Plastics and Elastomers End Uses
- Electrical/Electronic Applications
- Plastics and Elastomers Functions
- Mold Release Agent
- Release Agent
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Fire Service Act | Flammable | — |
| NET | 420 | ml |
| Principal Solvent | Isooctane | — |
| Propellant | LPG | — |
