To catalogue
Neoflon FEP ND-4R
- Chemical Family
- Fluoropolymers
Neoflon FEP ND-4R stands out as a top coat with waterborne coating features, boasting non-stick properties and an odorless composition. This product, labeled as odor-free, comes in a transparent color.
Product families
Ready-to-Use Products — Paints & Coatings
- Top Coats
Other characteristics
- Brand
- Neoflon
- Features
- Non Stick, Odorless
- Product Type
- Top Coat, Waterborne Coating
- Top Coat
- Waterborne Coating
- Note
- 1. The coating film was evaluated with a test piece below.
- Substrate
- Aluminum plate roughened with Tosa Emely Extra #80/#100=50/50
- Primer
- EK 1909S21R, approximately 10μm thick
- Topcoat
- Approximately 20μm thick
- 2. The above values in properties are typical and not guaranteed.
- Color
- Transparent
- Technology
- Ready-to-Use Products
- Labeling Claims
- Odor-free
- HIGHLIGHTS
Neoflon FEP ND - 4R is a water based FEP topcoat.; It makes a clear topcoat layer displaying non stick property.
- Ready to Use Product Features
- Non Stick
- Odorless
- Safety Information
Be sure to read the notes on SDS and labels before use.. This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Film Appearance | Clear | — |
| pH | 8 | — |
| Solid Content | 39 | mass% |
| Viscosity | 500 | cP |
Table 2 of 2
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Contact Angle (Hexadecane, at 25°C) | 50 - 53 | Degree | Contact Angle Meter |
| Contact Angle (Water, at 25°C) | 105 - 108 | Degree | Contact Angle Meter |
| Cross Cut Adhesion (Stripping with cellophane tape,10 times) | 100/100 | — | JIS K5400 8.5 |
| Pencil Hardness (at 25°C, Stripping hardness of base material) | H - 2H | — | JIS K6894 |
