Neoflon PFA AP-202
- Chemical Family
- Fluoropolymers
Neoflon PFA AP-202 is a resin product that accommodates processing methods such as extrusion and injection molding. Neoflon PFA AP-202 serves markets in electrical and electronics, printing, and packaging. Neoflon PFA AP-202 is a white-colored product comes in pellet and solid forms.
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
- Industrial & Transport Packaging
- Housings & Enclosures
- Semiconductor Manufacturing
- Jacketing & Insulation
Product Families
- High Performance Thermoplastics
Other characteristics
- Brand
- Neoflon
- Polymer Name
- Perfluoroalkoxy Polymer (PFA)
- Processing Methods
- Extrusion, Injection Molding
- Note
The above values are representative values, not guaranteed values.
- Color
- White
- Markets
- Electrical & Electronics
- Printing & Packaging
- Technology
- Plastics
- Benefits
AP 202 is a copolymer of tetrafluoroethylene and perfluoroalkyl vinyl ether.; Good melt flowability while maintaining excellent properties of PTFE. It can be melt molded as a thermoplastic resin by injection molding and extrusion molding.; Suitable for extrusion molding of extremely fine electric wires. It is also used for electric wires of personal computers and mobile phones.; Excellent chemical resistance which is not affected by most of the chemicals.; It retains flexibility without losing toughness under the environment from cryogenic to high temperature.; Low dielectric constant and dielectric loss tangent in a wide range of temperature and frequency.; It shows high electrical resistance and dielectric strength.; Nonflammable like Polyflon PTFE and Neoflon FEP.; Excellent weather resistance. No properties change even when exposed outside for a long time.; Non stickiness. It shows excellent releasability and water repellency / oil repellency.
- Material Features
- Chemical Resistant
- Electrical Resistance
- Excellent Melt Flow
- Good Mold Release
- Good Weather Stability
- High Dielectric Strength
- High Flowability
- High Temperature Strength
- Packing Specification
- 25Kg
- Plastics and Elastomers End Uses
- Bottles
- Cables
- Fittings
- Gaskets
- Housings
- Industrial Tanks
- Shipping Containers
- Tubes
- Plastics and Elastomers Functions
- Resin
- Safety Information
Be sure to read the notes on SDS and labels before use.. This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.
- Plastics and Elastomers Processing Methods
- Extrusion
- Injection Molding
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Elongation | 380 | % | ASTM D 1708 Compliant |
| Melting Point | 301 | ℃ | DSC |
| MFR | 68 | g/10min | ASTM D 3307 Compliant |
| Specific Gravity | 2.14 | — | ASTM D 792 Compliant |
| Tensile Strength | 25 | MPa | ASTM D 1708 Compliant |
