Neoflon PFA AP-230AS
- Chemical Family
- Fluoropolymers
Neoflon PFA AP-230AS, a resin product, caters to various markets, including consumer goods, electrical and electronics, and printing and packaging. Neoflon PFA AP-230AS has featuring processing methods like compression molding, extrusion, and transfer molding, this black-colored product comes in pellet and solid forms.
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Industrial & Transport Packaging
- Housings & Enclosures
- Semiconductor Manufacturing
- Jacketing & Insulation
Product Families
- High Performance Thermoplastics
Other characteristics
- Brand
- Neoflon
- Polymer Name
- Perfluoroalkoxy Polymer (PFA)
- Processing Methods
- Compression Molding, Extrusion, Transfer Molding
- Note
The above values in properties are representative and not guaranteed.
- Color
- Black
- Markets
- Consumer Goods
- Electrical & Electronics
- Printing & Packaging
- Technology
- Plastics
- Material Features
- Chemical Resistant
- Conductive
- Excellent Melt Flow
- Excellent Mold Release
- Excellent Water Resistance
- High Temperature Strength
- Low Temperature Strength
- Non Stick
- HIGHLIGHTS
AP - 230AS is a copolymer of tetrafluoroethylene and perfluoroalkyl vinyl ether.; It is a PFA with conductivity.; Good melt flowability while maintaining excellent properties of PTFE. It can be melt molded as a thermoplastic resin by extrusion molding, transfer molding, compression molding and the like.; Especially, it is used for thin walled tubes for copy rolls by extrusion molding.; Excellent chemical resistance which is not affected by most of the chemicals.; It can also be adopted to conductive valve lining applications.; It retains flexibility without losing toughness under the environment from cryogenic to high temperature.; No change in the resistance value up to 200 ℃.; Non stickiness. It shows excellent releasability and water repellency / oil repellency.
- Packing Specification
- 50Kg
- Plastics and Elastomers End Uses
- Bottles
- Cables
- Fittings
- Gaskets
- Housings
- Industrial Tanks
- Shipping Containers
- Tubes
- Plastics and Elastomers Functions
- Resin
- Safety Information
Be sure to read the notes on SDS and labels before use.. This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.
- Plastics and Elastomers Processing Methods
- Compression Molding
- Extrusion
- Transfer Molding
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Elongation | 260 | % | ASTM D 1708 Compliant |
| Melting Point | 300 | ℃ | DSC |
| MFR (at 372℃, 5kgf) | 1.9 | g/10min | — |
| Tensile Strength | 35 | MPa | ASTM D 1708 Compliant |
| Volume Resistivity | 7.5 x 10¹² | Ω･cm | ASTM D257 Compliant |
