DAI-EL G-555
- Chemical Family
- Fluoropolymers
DAI-EL G-555, featuring low-temperature flexibility, excellent fuel resistance, and odorless characteristics, targets automotive, building, and industrial applications. Primarily used in automotive fuel systems and building materials, this product, available in pellets, sheets, and solid forms, aligns with clean standards and utilizes extrusion processing methods.
Properties
- Physical Form
- Pellets
- Sheets
- Solid
Product families
Applications
- Fuel Systems
- Powertrain & UTH
- Pipes & Plumbing
- Equipment & Parts
Product Families
- Fluoroelastomers
Other characteristics
- Brand
- DAI-EL
- Features
Excellent Fuel Resistance, Good Processability, Low Temperature Flexibility, Odorless
- Polymer Name
- Fluoroelastomer (FKM)
- Processing Methods
- Extrusion
- Note
*1 The above values are representative and not guaranteed.; *2 [Formula] DAI EL G 555: 100 phr, SRF carbon black (N774): 15 phr, Calcium hydroxide: 6 phr, Magnesium Oxide (high active): 3 phr, [Curing condition] Press cure: 45min@160°C, Post cure: 24hrs@230°C.; *3 Compression set tested after post cure, while others tested without post cure.; *4 P 24 O ring.
- Markets
- Automotive & Transportation
- Building & Construction
- Industrial
- Soluble In
- Lower ketones and esters
- Cure
- Chemical Cure
- Technology
- Elastomers
- Benefits
DAI EL G 555 is a bisphenol type cure incorporated terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which has excellent extrusion processability.. It offers a good balance of fuel resistance and low temperature flexibility and is suitable for fuel hoses
- Material Features
- Excellent Fuel Resistance
- Good Processability
- Low Temperature Flexibility
- Odorless
- Packing Specification
- 20kg
- Plastics and Elastomers End Uses
- Automotive Fuel Lines
- Fuel Hose
- O Rings
- Safety Information
Be sure to read the notes on SDS and labels before use.. This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.
- Plastics and Elastomers Processing Methods
- Extrusion
Technical data
Table 1 of 2
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Fluorine Content | 69 | mass% | — |
| Compression Set (at 200°C,70 hours, 25% Compression*³) | 29 | % | — |
| Compression Set (at 200°C,70 hours, 25% Compression*⁴) | 29 | % | — |
| Elongation (at break) | 350 | % | ASTM D412 |
| Hardness (at 3 sec) | 62 | Shore A | ASTM D2240 |
| Hardness (at Peak) | 71 | Shore A | ASTM D2240 |
| Low Temperature Retraction (TR10) | -14 | °C | ASTM D1329 |
| Mooney Viscosity (ML₁₊₁₀) (at 100°C) | 44 | MU | ASTM D1646 |
| Mooney Viscosity (ML₁₊₁₀) (at 121°C) | 35 | MU | ASTM D1646 |
| Specific Gravity (at 23°C) | 1.87 | — | ASTM D792 |
| Tensile Strength | 11.7 | MPa | ASTM D412 |
Table 2 of 2
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| 100% Tensile Stress*² | 2.6 | MPa | ASTM D412 |
