To catalogue
Neoflon PFA AD-2CRER
- Chemical Family
- Fluoropolymers
Neoflon PFA AD-2CRER is categorized as a top coat with waterborne coating properties, is distinguished by its non-stick features and pinhole-free composition. Neoflon PFA AD-2CRER is in liquid form, ensures effective performance in various applications.
Properties
- Physical Form
- Liquid
Product families
Ready-to-Use Products — Paints & Coatings
- Top Coats
Other characteristics
- Brand
- Neoflon
- Features
- Non Stick, Pinhole-Free
- Product Type
- Top Coat, Waterborne Coating
- Top Coat
- Waterborne Coating
- Note
- 1. The coating film was evaluated with a test piece below.
- Substrate
- Aluminum plate roughened with Tosa Emely Extra #80/#100=50/50
- Primer
- EK 1909S21R, approximately 10μm thick
- Topcoat
- Approximately 10 ~ 15μm thick
- 2. The above values in properties are typical and not guaranteed.
- Technology
- Ready-to-Use Products
- HIGHLIGHTS
NEOFLON PFA AD - 2 grade is a water based PFA topcoat.; NEOFLON PFA AD - 2CRER makes a clear topcoat layer displaying non stick property.; It makes a pinhole free film.
- Ready to Use Product Features
- Non Stick
- Pinhole-Free
- Safety Information
Be sure to read the notes on SDS and labels before use.. This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Film Appearance | Clear | — |
| pH | 9 | — |
| Solid Content | 50 | mass% |
| Viscosity | 220 | cP |
Table 2 of 2
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Contact Angle (Hexadecane, at 25°C) | 50 - 56 | Degree | Contact Angle Meter |
| Contact Angle (Water, at 25°C) | 110 - 116 | Degree | Contact Angle Meter |
| Cross Cut Adhesion (Stripping with cellophane tape,10 times) | 100/100 | — | JIS K5400 8.5 |
| Pencil Hardness (at 25°C, Stripping hardness of base material) | H - 3H | — | JIS K6894 |
