OPTODYNE UV-1100
- Chemical Family
- Fluoropolymers
OPTODYNE UV-1100 is a radiation-curable adhesive designed for optical applications. Employing the cure method of radiation cure, this product stands out with its good adhesion and excellent processability. In its fluid form, OPTODYNE UV-1100 exhibits a light yellow transparent appearance, making it an ideal choice for optical bonding, ensuring reliable adhesion and easy processing.
Properties
- Physical Form
- Fluid
- Liquid
Product families
- Other Adhesives & Sealants
Other characteristics
- Brand
- OPTODYNE
- Cure Method
- Radiation Cure
- Product Type
- Adhesive, Radiation Curable Adhesive
- Adhesive
- Radiation Curable Adhesive
- Application Area
- Optical Applications
- Note
Curing conditions: 5 J/cm2 or 10 J/cm2 UV light was irradiated with a high pressure mercury lamp Fracture mode with bonding strength change is due to glass breakage; * The above values are representative and not guaranteed.; * Optodyne UV-1100, UV-2100, UV-3100 contains about 2% antimony compound.
- Appearance
- Light yellow transparent
- Cure
- Radiation Cure
- Technology
- Ready-to-Use Products
- Packaging Type
- Tubes
- HIGHLIGHTS
Transparent ultraviolet (UV) curing type optical adhesive based on fluorinated epoxy and fluorinated acrylate resin.; It is used to connect optical fibers requiring optically optimal refractive index matching as well as adhesion fixing function.; Highly reliable adhesive with excellent adhesion and workability.
- Packing Specification
- 5g (tube)
- 50g (tube)
- Ready to Use Product Features
- Good Adhesion
- Good Processability
- Safety Information
Be sure to read the notes on SDS and labels before use.. This product is intended for general industry use and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.
Technical data
Table 1 of 1
26 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Bonding Strength Change (Heat cycle resistance, Pyrex glass, -40~85℃, 90% RH, 6 hour/1cycle, after 100 cycles) | 6.4 | Mpa | — |
| Bonding Strength Change (Heat cycle resistance, Pyrex glass, -40~85℃, 90% RH, 6 hour/1cycle, Initial) | 6.6 | Mpa | — |
| Bonding Strength Change (Heat cycle resistance, Pyrex glass, -40~85℃,90% RH,6 hour/1cycle, after 300 cycles) | 8.7 | Mpa | — |
| Bonding Strength Change (Heat cycle resistance, Pyrex glass, -40~85℃,90% RH,6 hour/1cycle, after 500 cycles) | 7.5 | Mpa | — |
| Bonding Strength Change (Moisture resistance, Pyrex glass, 85℃/85 RH, after 4 weeks) | 7.5 | Mpa | — |
| Bonding Strength Change (Moisture resistance, Pyrex glass, 85℃/85 RH, after 6 weeks) | 7.4 | Mpa | — |
| Bonding Strength Change (Moisture resistance, Pyrex glass, 85℃/85 RH, Initial) | 6.6 | Mpa | — |
| Curing Contraction Rate (Post Curing) | approx. 4 - 5 | % | — |
| Flash Point (Before Curing) | 118 | ℃ | — |
| Glass Transition Temperature (Post Curing) | 145 | ℃ | — |
| Hardness (Post Curing) | 82 | Shore D | — |
| Main Constituents | Epoxy | — | — |
