OPTODYNE UV-3000
- Chemical Family
- Fluorinated Compounds
OPTODYNE UV-3000 is a cutting-edge product in the ready-to-use category, features excellent transparency properties, good adhesion, and UV-curable attributes. This light yellow transparent optical adhesive, crafted from fluorinated epoxy and fluorinated acrylate resin, is designed for optimal refractive index matching and adhesion when connecting optical fibers. With outstanding adhesion and workability, OPTODYNE UV-3000 ensures a highly reliable solution for various optical applications, meeting the demands of precision and performance.
Product families
- Other Adhesives & Sealants
Other characteristics
- Brand
- OPTODYNE
- Application Area
- Optical Applications
- Note
Curing conditions: 5 J/cm2 or 10 J/cm2 UV light was irradiated with a high pressure mercury lamp Fracture mode with bonding strength change is due to glass breakage. The above values in properties are representative and not guaranteed.
- Appearance
- Light yellow transparent
- Technology
- Ready-to-Use Products
- Packaging Type
- Tubes
- HIGHLIGHTS
Transparent ultraviolet (UV) curing type optical adhesive based on fluorinated epoxy and fluorinated acrylate resin.; It is used to connect optical fibers requiring optically optimal refractive index matching as well as adhesion fixing function.; Highly reliable adhesive with excellent adhesion and workability.
- Packing Specification
- 5g (tube)
- 50g (tube)
- Ready to Use Product Features
- Excellent Transparency Properties
- Good Adhesion
- UV Curable
- Safety Information
Be sure to read the notes on SDS and labels before use.. This product is intended for general industry use and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.
Technical data
Table 1 of 1
28 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Bonding Strength Change (Heat cycle resistance, Pyrex glass, -40~85℃, 90% RH, 6 hour/1cycle, after 100 cycles) | 10.7 | Mpa | — |
| Bonding Strength Change (Heat cycle resistance, Pyrex glass, -40~85℃, 90% RH, 6 hour/1cycle, Initial) | 7.3 | Mpa | — |
| Bonding Strength Change (Heat cycle resistance, Pyrex glass, -40~85℃,90% RH,6 hour/1cycle, after 300 cycles) | 10.1 | Mpa | — |
| Bonding Strength Change (Heat cycle resistance, Pyrex glass, -40~85℃,90% RH,6 hour/1cycle, after 500 cycles) | 8.7 | Mpa | — |
| Bonding Strength Change (Moisture resistance, Pyrex glass, 85℃/ 85 RH, after 2 weeks) | 9.2 | Mpa | — |
| Bonding Strength Change (Moisture resistance, Pyrex glass, 85℃/85 RH, after 4 weeks) | 6.5 | Mpa | — |
| Bonding Strength Change (Moisture resistance, Pyrex glass, 85℃/85 RH, after 6 weeks) | 5.2 | Mpa | — |
| Bonding Strength Change (Moisture resistance, Pyrex glass, 85℃/85 RH, Initial) | 7.8 | MPa | — |
| Coefficient of Thermal Expansion (Post Curing) | 6.2×10⁻⁵ | ℃⁻¹ | — |
| Curing Contraction Rate (Post Curing) | approx. 5 - 7 | % | — |
| Flash Point (Before Curing) | 132 | ℃ | — |
| Glass Transition Temperature (Post Curing) | 100 | ℃ | — |
