DAI-EL G-310LBP
- Chemical Family
- Fluoropolymers
DAI-EL G-310LBP, a solid product processed through transfer molding and injection molding, is characterized by good fluidity and an odorless profile. Soluble in lower ketones and esters, it caters to the automotive and transportation markets, finding applications in fuel entrance cover seals and O rings.
Properties
- Physical Form
- Solid
Product families
Applications
- Exterior & Body
- Powertrain & UTH
Product Families
- Fluoroelastomers
Other characteristics
- Brand
- DAI-EL
- Features
- Good Fluidity, Odorless
- Polymer Name
- Fluoroelastomer (FKM)
- Processing Methods
- Injection Molding, Transfer Molding
- Note
The above values are representative and not guaranteed.
- Markets
- Automotive & Transportation
- Soluble In
- Lower ketones and esters
- Cure
- Chemical Cure
- Technology
- Elastomers
- Benefits
DAI-EL G-310LBP is a bisphenol type copolymer of vinylidene fluoride and hexafluoropropylene.; It has good fluidity of molding. It is suitable for injection molding and transfer molding.; Use it for adjustment of cure density by mixing with other bisphenol curable products. It does not contain vulcanization agent and accelerator.
- Material Features
- Good Fluidity
- Odorless
- Packing Specification
- 20kg
- Plastics and Elastomers End Uses
- Fuel Entrance Cover Seal
- O Rings
- Safety Information
Be sure to read the Safety Data Sheet (SDS) and precautions on the label before using.. This product has been developed for industrial purpose and we shall not guarantee the safety if used for any other purposes. If it is going to be used for medical or food applications, please contact us in advance.
- Plastics and Elastomers Processing Methods
- Injection Molding
- Transfer Molding
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Fluorine Content | 66 | mass% | — |
| Mooney Viscosity (ML₁₊₁₀) (at 100°C) | 40 | MU | ASTM D1646 |
| Mooney Viscosity (ML₁₊₁₀) (at 121°C) | 23 | MU | ASTM D1646 |
| Specific Gravity (at 23°C) | 1.81 | — | ASTM D792 |
