DAIFREE GA-9750M
- Chemical Family
- Fluoropolymers
DAIFREE GA-9750M is designed for elastomers and plastics, providing excellent mold release without PFOA and PFOS. Utilizing fluorocarbon, ensures efficient release while adhering to environmental regulations like TSCA and RoHS. This product minimizes residue and mold contamination, reducing cleaning needs and enhancing productivity. Catering to industrial sectors such as chemical manufacturing and tooling, it's compatible with various polymers like ABS, EPDM, and PVC, making it ideal for electrical and electronic applications.
Properties
- Physical Form
- Liquid
Product families
Applications
- Tooling & Moldmaking
Product Families
- Performance Additives
- Performance Additives
Other characteristics
- Brand
- DAIFREE
- End Uses
- Electrical/Electronic Applications
- Functions
- Mold Release Agent, Release Agent
- Labeling Claims
- PFOA-free, PFOS-free
- PFOA-free
- PFOS-free
- Compatible Polymers & Resins
Acrylonitrile Butadiene Styrene (ABS), Chloroprene Rubber (CR), Epoxies (EP), Ethylene Propylene Diene Monomer (EPDM), Fluoroelastomer (FKM), Nitrile Butadiene Rubber (NBR), Phenolic Resins, Polyacrylate Rubber (ACM), Polyethylenes (PE), Polypropylenes (PP), Polyvinyl Chloride (PVC), Styrene Butadiene Rubber (SBR), Unsaturated Polyester (UPE)
- Note
*¹ The above values are representative and not guaranteed.
- Markets
- Industrial
- Package Size
- 20 cans / 1 carton
- Technology
- Elastomers
- Plastics
- Use Method
How to apply; Shake the can well, hold it about 20‐30cm away from the mold, and then spray lightly so that a thin uniform film is formed.; Before using the product for the first time, remove the old release agent completely.; Use the steps in '(2) Cleaning the mold' below to clean correctly.; Cleaning the mold; Slight contamination of the mold release agent can usually be removed to a certain degree by wiping with a solvent (IPA, toluene, acetone).; Alkaline cleaning agents are effective for complete removal. (Immerse in an approx.; 10% aqueous solution of potassium hydroxide or sodium hydroxide to which a small amount of surfactant has been added. The cleaning solution should be at a temperature of 60‐80°C); Use temperature range; From room temperature to 200°C
- Packaging Type
- Cans
- Cartons
- Benefits
High effective release performance with fluorocarbon as the principal ingredient.; PFOA and PFOS free* and complies with environmental regulations such as TSCA and RoHS.; *≦5ppb detection limit.; Little transfer, no stickiness left on the mold product.; Minimal mold contamination is produced, reducing mold -cleaning requirements and improving productivity.; A degassing cap is provided so that the aerosol product can be discarded safely
- Material Features
- Good Mold Release
- Non Stick
- Chemical Inventories
- TSCA (USA)
- Certifications and Compliance
- RoHS Compliant
- Compatible Polymers and Resins
- Acrylonitrile Butadiene Styrene (ABS)
- Chloroprene Rubber (CR)
- Epoxies (EP)
- Ethylene Propylene Diene Monomer (EPDM)
- Fluoroelastomer (FKM)
- Nitrile Butadiene Rubber (NBR)
- Phenolic Resins
- Polyacrylate Rubber (ACM)
- Plastics and Elastomers End Uses
- Electrical/Electronic Applications
- Plastics and Elastomers Functions
- Mold Release Agent
- Release Agent
- Safety Information
Be sure to read the Safety Data Sheet (SDS) and precautions on the label before using.. This product has been developed for industrial purposes and we shall not guarantee the the safety if used for any other purposes. If it is going to be used for medical or food applications, please contact us in advice.
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Fire Service Act | Flammable | — |
| NET | 420 | ml |
| Principal Solvent | Isooctane | — |
| Propellant | LPG | — |
