DAI-EL G-576BP
- Chemical Family
- Fluoropolymers
DAI-EL G-576BP, available in sheet form, stands out with its chemical resistance, odorless composition, good moldability, and compression set. Suited for automotive and industrial applications, it caters to fuel lines, hoses, and O rings, featuring a brown color. The product utilizes injection molding processing methods.
Properties
- Physical Form
- Sheets
Product families
- Fuel Systems
- Powertrain & UTH
- Equipment & Parts
Other characteristics
- Brand
- DAI-EL
- Color
- Brown
- End Uses
- Automotive Fuel Lines, Fuel Hose, O Rings
- Features
Chemical Resistant, Good Compression Set, Good Moldability, Odorless
- Polymer Name
- Fluoroelastomer (FKM)
- Note
*1 The above values are representative and not guaranteed.; *2 [Formula] DAI EL G 555: 100 phr, SRF carbon black (N774): 15 phr, Calcium hydroxide: 6 phr, Magnesium Oxide (high active): 3 phr, [Curing condition] Press cure: 45min@160°C, Post cure: 24hrs@230°C.; *3 Compression set tested after post cure, while others tested without post cure.; *4 P 24 O ring.
- Markets
- Automotive & Transportation
- Industrial
- Soluble In
- Lower ketones and esters
- Technology
- Elastomers
- Benefits
DAI EL G 576BP is a bisphenol curable terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which has excellent injection moldability.; It offers good chemical resistance and compression set.; It does not contain curing agent and accelerator
- Product Families
- Elastomers — Parts & Shapes
- Material Features
- Chemical Resistant
- Good Compression Set
- Good Moldability
- Odorless
- Packing Specification
- 20kg
- Plastics and Elastomers End Uses
- Automotive Fuel Lines
- Fuel Hose
- O Rings
- Safety Information
Be sure to read the notes on SDS and labels before use.. This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Fluorine Content | 68.5 | mass% | — |
| Mooney Viscosity (ML₁₊₁₀) (at 100°C) | 89 | MU | ASTM D1646 |
| Mooney Viscosity (ML₁₊₁₀) (at 121°C) | 52 | MU | ASTM D1646 |
| Specific Gravity (at 23°C) | 1.87 | — | ASTM D792 |
