Daikin Industries, Ltd. PPA DA-810X
- Chemical Family
- Fluoropolymers
Daikin Industries, Ltd. PPA DA-810X, functioning as a processing aid, is tailored for applications in wire and cable jacketing and insulation within the electrical and electronics markets. With a focus on polymers like linear low-density polyethylene (LLDPE) and low-density polyethylene (LDPE), this white powder in solid form enhances the extrusion process.
Properties
- Physical Form
- Powder
- Solid
Product families
Applications
- Jacketing & Insulation
Product Families
- Processing Aids
Other characteristics
- End Uses
- Cables, Wires
- Functions
- Processing Aid
- Processing Methods
- Extrusion
- Compatible Polymers & Resins
Linear Low Density Polyethylene (LLDPE) , Low-Density Polyethylene (LDPE)
- Note
The above numeric values are representative and not guaranteed.
- Markets
- Electrical & Electronics
- Appearance
- White powder
- Technology
- Plastics
- Benefits
Developed for processing of polyolefin resin (LLDPE, LDPE, etc.) and especially suitable for polyethylene film.; Coating extrusion equipment decreases the friction between the polymer melt and the die wall.; Reducing die pressure can eliminate melt fracture and die build up.; Lower extrusion temperature can be applied and simultaneously improve line speed.
- Material Features
- Odorless
- Packing Specification
- 20kg
- Compatible Polymers and Resins
- Linear Low Density Polyethylene (LLDPE)
- Low-Density Polyethylene (LDPE)
- Plastics and Elastomers End Uses
- Cables
- Wires
- Plastics and Elastomers Functions
- Processing Aid
- Safety Information
Be sure to read the notes on SDS and labels before use.; This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.; Daikin PPA DA-810X complies with United States FDA regulation 21 CFR 177.1520 when used at levels not to exceed 0.21%. The polyolefins containing Daikin PPA DA-810X may be used only for conditions A through H, in table 2, 21 CFR 176.170. Daikin PPA DA-810X complies with Regulation (EC) No 1935/2004 on materials and articles intended to come into contact with food and with Commission Regulation (EU) No 10/2011 of 14 January, 2011 on plastic materials and articles intended to come into contact with food. It is the sole responsibility of the user to determine whether the use of Daikin PPA DA-810X in a particular application is suitable and complies with applicable laws and regulations.
- Plastics and Elastomers Processing Methods
- Extrusion
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Active Ingredient (Fluoroelastomer) | 97 | % | Internal Method |
| Bulk Density | 0.7 | g/cm³ | ISO 60 |
| Particle Size | 300 | μm | ISO 2591-1 |
| Partitioning Agent (inorganic) | 3 | % | Internal Method |
