Neoflon FEP NP-3180
- Chemical Family
- FluoropolymersPolyolefins
Neoflon FEP NP-3180, in pellet and solid forms, combines features like chemical resistance, high extrusion speed, and high-temperature strength. Targeting markets in automotive, electrical, and electronics, it caters to applications like coaxial cable insulation and communication cable jacketing. With extrusion as its processing method, it offers versatility for specific end uses.
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
- Powertrain & UTH
- Data Communication Cables
- Jacketing & Insulation
Product Families
- High Performance Thermoplastics
Other characteristics
- Brand
- Neoflon
- Polymer Name
- Perfluoroethylene Propylene Copolymer (FEP)
- Processing Methods
- Extrusion
- Note
* The above numeric values are representative and not guaranteed.
- Color
- White
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Technology
- Plastics
- Material Features
- Chemical Resistant
- Good Electrical Properties
- Good Mechanical Properties
- High Extrusion Speed
- High Melt Flow
- High Temperature Strength
- Odorless
- HIGHLIGHTS
Neoflon FEP NP-3180 is a copolymer of tetrafluoroethylene and hexafluoropropylene.; Quite similar properties as PTFE. Chemical, electrical and mechanical properties.; Continuous service temperature is 200°C.; High melt flow rate.; One of typical applications is thin wall wire and cable insulation by high speed extrusion process.; Very low dissipation factor, which is suitable for high frequency communication cable.
- Packing Specification
- 25 Kg
- Plastics and Elastomers End Uses
- Coaxial Cable Insulation
- Communication Cable Jacketing
- Communication Wire Insulation
- Plenum Cable Insulation
- Plastics and Elastomers Functions
- Resin
- Safety Information
Be sure to read the notes on SDS and labels before use.. This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.
- Plastics and Elastomers Processing Methods
- Extrusion
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dissipation Factor (at 6GHz) | 3.0x10⁻⁴ | — | ASTM D 2520 |
| Elongation | 300 | % | ASTMD638 |
| Melting Point | 270 | °C | ASTM D 2116 |
| MFR | 3 | g/10min | ASTM D 2116 |
| Specific Gravity | 2.15 | — | ASTM D 792 |
| Tensile Strength | 28 | MPa | ASTM D 638 |
