DAI-EL G-501N
- Chemical Family
- Fluoropolymers
DAI-EL G-501N is a versatile product renowned for its chemical resistance, automotive fluid resistance, low-temperature flexibility, and odorless properties. It caters to the automotive and transportation markets, specifically in applications such as automotive exterior and body components, powertrain elements, and electrical seals. Employed through chemical cure and compression molding, this solid product is soluble in lower ketones and esters.
Properties
- Physical Form
- Solid
Product families
Applications
- Exterior & Body
- Powertrain & UTH
Product Families
- Fluoroelastomers
Other characteristics
- Brand
- DAI-EL
- Features
Automotive Fluid Resistant, Chemical Resistant, Low Temperature Flexibility, Odorless
- Polymer Name
- Fluoroelastomer (FKM)
- Processing Methods
- Compression Molding
- Note
*1 The above numeric values are representative and not guaranteed. *2 [Formula] DAI-EL G-501N: 100 phr, MT carbon black (N990): 20 phr, Magnesium Oxide (low-active): 15 phr, Vulcanizing agent V-3: 3 phr, [Curing condition] Press cure: 20min at 190°C, Post cure: 24hrs at 200°C.
- Markets
- Automotive & Transportation
- Soluble In
- Lower ketones and esters
- Cure
- Chemical Cure
- Technology
- Elastomers
- Material Features
- Automotive Fluid Resistant
- Chemical Resistant
- Low Temperature Flexibility
- Odorless
- HIGHLIGHTS
DAI-EL G-501N is a diamine curable terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which is suitable for compression molding.; It provides a good balance of chemical resistance and cold temperature flexibility.; Use it for adjustment of cure density by mixing with other bisphenol curable products. It does not contain vulcanization agent and accelerator.
- Packing Specification
- 20 Kg
- Plastics and Elastomers End Uses
- Electrical Seals
- Front Spoiler
- Fuel Entrance Cover Seal
- Gaskets
- O Rings
- Side Spoiler
- Safety Information
Be sure to read the Safety Data Sheet (SDS) and precautions on the label before using.. This product has been developed for industrial purposes and we shall not guarantee the the safety if used for any other purposes. If it is going to be used for medical or food applications, please contact us in advance.
- Plastics and Elastomers Processing Methods
- Compression Molding
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Fluorine Content | 68.5 | mass% | — |
| Mooney Viscosity (ML₁₊₁₀)(at 121°C) | 64 | MU | ASTM D1646 |
| Mooney Viscosity (ML₁₊₁₀)(at 140°C) | 37 | MU | ASTM D1646 |
| Specific Gravity (at 23°C) | 1.87 | — | ASTM D792 |
Table 2 of 2
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| 100% Tensile Stress*² | 3.5 | MPa | ASTM D412 |
| Elongation (at break)*² | 310 | % | ASTM D412 |
| Hardness (at 3 sec)*² | 74 | Shore A | ASTM D2240 |
| Hardness (at Peak)*² | 78 | Shore A | ASTM D2240 |
| Low Temperature Retraction (TR10)*² | -13 | °C | ASTM D1329 |
| Tensile Strength*² | 15.7 | MPa | ASTM D412 |
