Neoflon PFA AP-230ASL
- Chemical Family
- Fluoropolymers
Neoflon PFA AP-230ASL, available in black pellets or solid form, is a conductive resin crafted for extrusion, transfer molding, and compression molding. Exhibiting features such as chemical resistance, excellent melt flow, and high-temperature strength, this product targets markets like consumer goods, electrical and electronics, and printing and packaging. Applications span from bottles and cables to valve parts and wires, meeting diverse industry needs.
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Industrial & Transport Packaging
- Housings & Enclosures
- Semiconductor Manufacturing
- Jacketing & Insulation
Product Families
- High Performance Thermoplastics
Other characteristics
- Brand
- Neoflon
- Polymer Name
- Perfluoroalkoxy Polymer (PFA)
- Processing Methods
- Compression Molding, Extrusion, Transfer Molding
- Note
The above values are representative values, not guaranteed values.
- Color
- Black
- Markets
- Consumer Goods
- Electrical & Electronics
- Printing & Packaging
- Technology
- Plastics
- Benefits
AP 230 ASL is a conductive fluorocarbon resin suitable for extrusion molding.; It is a PFA with conductivity.; Good melt flowability while maintaining excellent properties of PTFE. It can be melt molded as a thermoplastic resin by extrusion molding, transfer molding, compression molding and the like.; Especially, it is used for thin walled tubes for copy rolls by extrusion molding.; Excellent chemical resistance which is not affected by most of the chemicals.; It can also be adopted to conductive valve lining applications.; It retains flexibility without losing toughness under the environment from cryogenic to high temperature.; No change in the resistance value up to 200 °C°C.; Non stickiness. It shows excellent releasability and water repellency / oil repellency.
- Material Features
- Chemical Resistant
- Conductive
- Excellent Melt Flow
- Excellent Mold Release
- Excellent Water Resistance
- High Temperature Strength
- Low Temperature Strength
- Non Stick
- Packing Specification
- 50 Kg
- Plastics and Elastomers End Uses
- Bottles
- Cables
- Fittings
- Gaskets
- Housings
- Industrial Tanks
- Shipping Containers
- Tubes
- Plastics and Elastomers Functions
- Resin
- Safety Information
Be sure to read the notes on SDS and labels before use.. This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.
- Plastics and Elastomers Processing Methods
- Compression Molding
- Extrusion
- Transfer Molding
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Elongation | 300 | % | ASTM D 1708 Compliant |
| Melting Point | 303 | ℃ | DSC |
| MFR (at 372℃, 5kgf) | 1.7 | g/10min | — |
| Tensile Strength | 25 | MPa | ASTM D 1708 Compliant |
| Volume Resistivity | 1.0 x 10⁷ | Ω･cm | ASTM D257 Compliant |
