Neoflon CPT LP-1030
- Chemical Family
- Fluoropolymers
Neoflon CPT LP-1030 is a copolymer combining tetrafluoroethylene and perfluoroalkyl vinyl ether, distinguished by its exceptional mechanical properties and permeability. Resistant to a wide range of organic solvents, acids, and alkalis, it stands out for its low permeability to volatile chemicals and gasses, as well as its impressive light transmission from ultraviolet to visible ranges. Comparable in mechanical properties to PFA and FEP, LP-1030 is ideal for melt-molding processes like extrusion molding of tubes and films and compression molding. Notably, it facilitates the creation of multi-layer tubes in conjunction with PFA, which is crucial for applications demanding superior barrier properties in chemical liquid piping for semiconductors in the automotive and electronics sectors.
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
- Fuel Systems
- Semiconductor Manufacturing
Product Families
- High Performance Thermoplastics
Other characteristics
- Brand
- Neoflon
- Polymer Name
- Fluoropolymer
- Processing Methods
- Coextrusion, Compression Molding, Extrusion
- Note
The above values in properties are representative values, not guaranteed values.
- Color
- White
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Technology
- Plastics
- Material Features
- Good Mechanical Properties
- High Air Permeability
- High Gas Permeability
- High Light Transmission
- Odorless
- HIGHLIGHTS
NEOFLON CPT LP-1030 is a copolymer of tetrafluoroethylene and perfluoroalkyl vinyl ether in which main chain the third monomer added.; Except for some chlorine-based solvents, it is hardly affected by organic solvents, acids and alkalis.; A fluoropolymer with excellent low permeability to volatile chemicals, water vapor, and gasses.; A fluoropolymer with excellent light transmittance in the ultraviolet to visible light range.; The mechanical properties of CPT LP-1030 are almost the same as PFA and FEP.; It can be melt-molded as a thermoplastic resin by extrusion molding of tubes and films, compression molding and the like.; CPT LP-1030 is capable of molding multi-layer tubes by coextrusion with PFA.; Multi-layer tube with PFA is used for applications that require barrier properties in chemical liquid piping for semiconductors.
- Packing Specification
- 25 Kg
- Plastics and Elastomers End Uses
- Automotive Fuel Filler Neck Pipes
- Automotive Fuel Lines
- Fuel Hose
- Semiconductor Applications
- Tubes
- Plastics and Elastomers Functions
- Resin
- Safety Information
Be sure to read the notes on SDS and labels before use.. This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.
- Plastics and Elastomers Processing Methods
- Coextrusion
- Compression Molding
- Extrusion
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Bulk Density | 1.23 | g/ml | JIS K 6891 |
| Elongation | 370 | % | ASTM D 7471 |
| Melting Point | 248 | ℃ | ASTM D 7471 |
| MFR (at 297℃, 49N Load) | 8 | g/10min | ASTM D 7471 |
| Specific Gravity | 2.13 | — | ASTM D 7471 |
| Tensile Strength | 37 | MPa | ASTM D 7471 |
