Neoflon ETFE EP-610AS
- Chemical Family
- FluoropolymersPolyolefins
Neoflon ETFE EP-610AS, in black pellet and solid forms, combines excellent flexibility, good adhesion, and a low melting point. Targeting automotive and electrical and electronics markets, it caters to applications like automotive fuel lines, cables, connectors, and semiconductor applications. With processing methods including extrusion and injection molding, it offers a specialized solution with a distinctive appearance.
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
- Fuel Systems
- Powertrain & UTH
- Connectors
- Terminal Blocks Plugs & Sockets
- Jacketing & Insulation
Product Families
- High Performance Thermoplastics
Other characteristics
- Brand
- Neoflon
- Polymer Name
- Ethylene Tetrafluoroethylene Copolymer (ETFE)
- Processing Methods
- Extrusion, Injection Molding
- Note
* The above numeric values are representative and not guaranteed
- Color
- Black
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Technology
- Plastics
- Material Features
- Chemical Resistant
- Conductive
- Excellent Melt Flow
- Good Electrical Properties
- Good Mechanical Properties
- Good Processability
- Low Specific Gravity
- Odorless
- HIGHLIGHTS
NEOFLON EP-610AS is a copolymer of tetrafluoroethylene and ethylene incorporating conductivity, which is chemically stable and electrically unique.; Good mechanical properties, good processability and good radiation resistance. Owing to the feature of ethylene (comonomer).; Low specific gravity.; Good for both extrusion and injection molding due to its good melt flowability.
- Packing Specification
- 50 Kg
- Plastics and Elastomers End Uses
- Automotive Fuel Lines
- Cables
- Connectors
- Fuel Hose
- Fuel Pipes
- Pipe Liners
- Sockets
- Wires
- Plastics and Elastomers Functions
- Resin
- Safety Information
Be sure to read the notes on SDS and labels before use.. This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.
- Plastics and Elastomers Processing Methods
- Extrusion
- Injection Molding
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Elongation | 200 | % | ASTM D 638 |
| MFR | 5 | g/10min | ASTM D 3159 |
| Resistance Value (Insulation Resistance Tester, 7cm long) | 0.2 | MΩ | DAIKIN Method |
| Specific Gravity | 1.86 | — | ASTM D 792 |
| Tensile Strength | 20 | MPa | ASTM D 638 |
