SABIC's Specialties Business LNP STAT-KON RE008 compound is based on Nylon 6/6 resin containing 40% carbon fiber. Added features of this grade include: Electrically Conductive. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
Product families
Applications
Electrical & Electronics — Devices & Assemblies
Industrial Automation
Electrical & Electronics — Parts & Components
Semiconductor Manufacturing
Product Families
Plastics — Engineering & Specialty Polymers
Polyamides
Other characteristics
Brand
LNP™ STAT-KON™ Compound
Polymer Name
Polyamide 66 (PA 66)
Fillers Included
Carbon Fiber
Flexural Modulus
25000.0 - 25000.0 MPa
Processing Methods
Injection Molding
Note
ᵈ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding. Do NOT mix NORYL GTX* resin with other grades of NORYL* resins. Polystyrene and acrylic regrind are effective purging Materials. Use temperature range appropriate for particular purging resin. Regrind must also be dried. Maximum 25% regrind. Dry at recommended temperatures and times for optimum performance. Overdrying can cause loss of physical properties and/or create appearance defects. Do not exceed recommended basic drying time and temperature above or:\n4-8 hrs at 95°C (200°F), 10 hrs max\n6-12 hrs at 80°C (175°F), 16 hrs max\n8-16 hrs at 65°C (150°F), 24 hrs max\nAVOID air circulating tray ovens. Moisture levels in heated ambient air can exceed moisture level in the resin itself, causing moisture ABSORPTION not drying. Avoid melt temperature in excess of 300°C (575°F) and residence times over 6-8 minutes (may affect properties and/or appearance). Nozzle temperature controls assist in elimination of drool premature freeze-off. Shot sizes in excess of 50% barrel capacity can lead to difficulties in providing a consistent, homogenous plastic melt.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets
Electrical & Electronics
Flame Rating
UL 94 HB
Technology
Plastics
Labeling Claims
No Added PFAS
Material Features
ESD Protection
Electrically Conductive
High Stiffness
High Strength
Light Weight
No Added PFAS
UL Listed
Country Availability
Canada
China (Mainland)
Mexico
USA
Certifications and Compliance
UL 94
Plastics and Elastomers End Uses
Electrical/Electronic Applications
Semiconductor Applications
Plastics and Elastomers Functions
Resin
Plastics and Elastomers Processing Methods
Injection Molding
Technical data
Table 1 of 7
7 rows
Characteristic
Value
Unit
Method
Tensile Stress (Break, Type I, 5 mm/min) ¹¹
259
MPa
ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹
1.3
%
ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹
33330
MPa
ASTM D638
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹
390
MPa
ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹
25580
MPa
ASTM D790
Tensile Strain (Yield, 5 mm/min) ¹¹
252
%
ISO 527
Flexural Modulus (at 2 mm/min) ¹¹
25000
MPa
ISO 178
Table 2 of 7
1 row
Characteristic
Value
Method
Specific Gravity ¹¹
1.32
ASTM D792
Table 3 of 7
5 rows
Characteristic
Value
Unit
Method
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹
The Omnichem website uses cookies. By continuing to use the site, you consent to their use in accordance with our Privacy Policy and to the collection of analytics.
