LNP™ STAT-KON™ Compound EE003XXC

Chemical Family: Polyetherimide (PEI)Polyimides (PI)

SABIC's Specialties Business LNP STAT-KON EE003XXC compound is based on Polyetherimide (PEI) resin containing 15% carbon fiber. Added features of this grade include: LNP Clean Compounding Technology, Electrically Conductive. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Product families

Applications

Consumer Goods — Appliances & Electronics

Electrical & Electronics — Devices & Assemblies

Consumer Electronics
Displays
Industrial Automation

Electrical & Electronics — Parts & Components

Connectors
Semiconductor Manufacturing
Switches & Relays

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics

Other characteristics

Brand: LNP™ STAT-KON™ Compound
Polymer Name: Polyether Imide (PEI)
Fillers Included: Carbon Fiber
Flexural Modulus: 11720.0 - 11720.0 MPa
Processing Methods: Injection Molding
Note: ᵈ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding. Do NOT mix NORYL GTX* resin with other grades of NORYL* resins. Polystyrene and acrylic regrind are effective purging Materials. Use temperature range appropriate for particular purging resin. Regrind must also be dried. Maximum 25% regrind. Dry at recommended temperatures and times for optimum performance. Overdrying can cause loss of physical properties and/or create appearance defects. Do not exceed recommended basic drying time and temperature above or:\n4-8 hrs at 95°C (200°F), 10 hrs max\n6-12 hrs at 80°C (175°F), 16 hrs max\n8-16 hrs at 65°C (150°F), 24 hrs max\nAVOID air circulating tray ovens. Moisture levels in heated ambient air can exceed moisture level in the resin itself, causing moisture ABSORPTION not drying. Avoid melt temperature in excess of 300°C (575°F) and residence times over 6-8 minutes (may affect properties and/or appearance). Nozzle temperature controls assist in elimination of drool premature freeze-off. Shot sizes in excess of 50% barrel capacity can lead to difficulties in providing a consistent, homogenous plastic melt.; ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Consumer Goods
Electrical & Electronics
Flame Rating: UL 94 V0
Technology: Plastics
Labeling Claims: No Added PFAS
Material Features: ESD Protection
Electrically Conductive
High Stiffness
High Strength
Light Weight
Low Liquid Particle Count
Low Outgassing
No Added PFAS
Country Availability: Canada
China (Mainland)
Mexico
USA
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Cell Phones
Computer Components
Displays
Electrical Components
Electrical/Electronic Applications
Semiconductor Applications
Tablets
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 7

4 rows

Characteristic	Value	Unit	Method
Tensile Stress (Break) ¹¹	165	MPa	ASTM D638
Tensile Strain (Break) ¹¹	1.6	%	ASTM D638
Flexural Stress ¹¹	248	MPa	ASTM D790
Flexural Modulus ¹¹	11720	MPa	ASTM D790

Table 2 of 7

2 rows

Characteristic	Value	Unit	Method
Density ¹¹	1.33	g/cm³	ASTM D792
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.1 - 0.3	%	ASTM D955

Table 3 of 7

3 rows

Characteristic	Value	Unit	Method
Relative Temperature Index (Electrical) ᵖ ¹¹	105	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	105	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	105	°C	UL 746B

Table 4 of 7