Fasson® SSL FG
- Chemical Family
- Polyethylene Terephthalate (PET)
Avery Dennison™ FASSON® SSL FG is a 1.25" pattern-gum, self-sealing lap tape for applications requiring quick stick and good adhesion to plastics and other low surface energy substrates. It is designed for poly, metal and scrim facings for the insulation industry.
Product families
Applications
- EIFS & Insulation
Product Families
- Pressure Sensitive Adhesives & Tapes
Other characteristics
- Brand
- Fasson
- Features
Chemical Resistant, Excellent Substrate Adhesion, Good Processability, Low Temperature Performance, Moisture Resistant, Outdoor Durability, Tacky; Polyester carrier.; Specially formulated "COLD TOUGH®" acrylic adhesive.; Natural kraft release liner.; Pattern gum / 1.25" rolls finger lift edge available in left and right orientations.; Environmental Resistance; Chemical Resistance; Moisture Resistance
- Product Type
- Double Sided Tape
- Compatible Substrates & Surfaces
- Metal, Plastics
- Markets
- Building & Construction
- Benefits
Excellent processing and die-cutting stability.; Good adhesion and tack to low surface energy substrates.; Can be applied at temperatures below freezing (min. 0°F).; Adhesive resists environmental exposures.; Made in the USA.
- Technology
- Ready-to-Use Products
- Common Applications
- Building and Construction
- Shelf Life Storage
One year when stored at 64 - 72ºF (18 - 22ºC) / 30 - 70% relative humidity, out of direct sunlight and in original packaging.
- Backing Material Type
- Polyester
- Application Technique
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry, and free of grease or oil.; Bond strength is dependent upon the amount of adhesive-to-surface contact developed.; Note that different pressure, time and temperature on different (film / rigid) surface achieves different performance.
- Ready to Use Product Features
- Chemical Resistant
- Excellent Substrate Adhesion
- Good Processability
- Low Temperature Performance
- Moisture Resistant
- Outdoor Durability
- Tacky
- Compatible Substrates and Surfaces
- Metal
- Plastics
Technical data
Table 1 of 1
16 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Application Temperature | min. -18 | ºC | — |
| Continuous Operating Temperature | max. 99 | ºC | — |
| Intermittent Operating Temperature | max. 135 | ºC | — |
| Peel Adhesion (180º, 12 in (305 mm) / min), (Substrate SS - Liner - Initial) | 704.0 | N/m | ASTM D3330 |
| Peel Adhesion (180º, 12 in (305 mm) / min), (Substrate SS - Unwind - Initial) | 704.0 | N/m | ASTM D3330 |
| Peel Adhesion (ANGLE, 12 in (305 mm) / min), (Substrate WMP-ASJ - Liner - 15 min dwell) | 405.0 | N/m | ASTM D3330 |
| Static Shear Failure Time (180º, 1/2" sq (3.25 cm2), 1000 g at 20ºF / -7ºC), (Substrate SS - Liner - Initial) | min. 100 | Mins | ASTM D3654 |
| Static Shear Failure Time (180º, 1/2" sq (3.25 cm2), 1000 g at 20ºF / -7ºC), (Substrate SS - Unwind - Initial) | min. 100 | Mins | ASTM D3654 |
| Static Shear Failure Time (180º, 1/2" sq (3.25 cm2), 1000 g at Room Temperature), (Substrate SS - Liner - Initial) | min. 100 | Mins | ASTM D3654 |
| Static Shear Failure Time (180º, 1/2" sq (3.25 cm2), 1000 g at Room Temperature), (Substrate SS - Unwind - Initial) | min. 100 | Mins | ASTM D3654 |
| Thickness (Adhesive 1 - Liner) | 36.0 | µm | ASTM D3652 |
| Thickness (Adhesive 2 - Unwind) | 36.0 | µm | ASTM D3652 |
