Fine-L-Kote HT High-Temp Silicone Conformal Coating
- Chemical Family
- Silicones
Fine-L-Kote HT High-Temp Silicone Conformal Coating is intended to prevent thermal breakdown at high temperatures. Silicone Conformal Coating is the most versatile coating, providing protection in a wide range of environments.
Properties
- Physical Form
- Liquid
Product families
Applications
- Electronics Coatings
- Printed Circuit Boards (PCBs)
Product Families
- Protective Coatings
Other characteristics
- Brand
- Fine-L-Kote
- Features
Chemical Resistant, Corrosion Resistant, Excellent Dielectric Properties, Excellent Humidity Resistance, Excellent Moisture Resistance, Excellent Salt Spray Resistance, Fast Drying, Flexible, Heat Resistance, High Temperature Resistance, Resilient, UV Detectable, Vibration Damping
- Product Type
- Conformal Coating
- Application Area
- Printed Electronics, Signage
- Printed Electronics
- Signage
- Application Method
- Brush, Dip Coating, Spray
- Odor
- Aromatic odor
- Markets
- Electrical & Electronics
- Shelf LIfe
- 1 Year
- Insoluble In
- Water
- Technology
- Ready-to-Use Products
- Quality Standards
- IPC-CC-830B
- Application Methods
- Brush
- Dip Coating
- Spray
- Usage Instruction
Spray Application: Apply top to bottom, allowing coating to flow evenly around components. Rotate PCB 90º and repeat application. Rotate and apply coating two additional times, then allow board to cure. If additional thickness is desired, apply additional coatings. When using liquid spray with automatic dispensing equipment, adjustments may be required in application rate and viscosity. Dip Application: Using automatic equipment or hand immersion technique, slowly immerse PCB into the coating and remove slowly. Use an average rate of approximately 1 foot per minute. After allowing the board to cure, process may be repeated to achieve desired thickness. Brush Application: Evenly apply coating to areas desired at thickness required. Allow time for curing before reapplying to achieve a thick coating. Use WonderMASK to protect components during conformal coating process. After application, cured Fine-L-KoteTM may be removed using Techspray Conformal Coating Removal Pen (2510-N or 2510-P). Performance & Application Data
- Environmental Policy
Techspray® is committed to developing products to ensure a safer and cleaner environment. We will continue to meet and sustain the regulations of all federal, state and local government agencies.
- Benefits and Features
• Designed for high temperature environments • Fast-drying silicone 1-step process • Thermal resistance - to 662°F (350°C) • Dielectric strength - 560 volts/mil • IPC-CC-830B Certified • UL94 V-0 rated • Moisture resistant • Vibration resistant - flexible • UV indicator for black light inspection
- Certifications and Compliance
- UL 94
- Ready to Use Product Features
- Chemical Resistant
- Corrosion Resistant
- Excellent Dielectric Properties
- Excellent Humidity Resistance
- Excellent Moisture Resistance
- Excellent Salt Spray Resistance
- Fast Drying
- Flexible
Technical data
Table 1 of 2
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Percent Volatile | 80.0 | — | — |
| Vapor Density (Air=1) | min. 1 | — | — |
| Boiling Point | 230.0 | º F | — |
| Flashpoint and Method | 40.0 | ºF | TAG CC |
| Density | 0.92 | — | — |
| VOC | 724.0 | g/L | — |
Table 2 of 2
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Cure Type | Thermal/Air | — |
| Tack Free Time | 45.0 | minutes |
| Accelerated Cure Time/Temperature (1 Step,49°C) | 15.0 | minutes |
| Ambient Cure Time | 24.0 | Hrs |
| Viscosity (Bulk) | 2022-10-30 | cps |
| Operating Temperature Range | -40 to 350 | °C |
| Dielectric Strength | 560.0 | V/Mil |
| Insulation Resistance | 1.33 x 1016 | ohms |
