Dioki GPPS® 610

Chemical Family: Styrenics

Dioki GPPS® 610 is transparent general purpose polystyrene exhibiting excellent optical properties, good melt flow properties. Dioki GPPS® 610 is especially intended for injection molding of thin-walled products having good optical properties. This polystyrene grade exhibits excellent processability with short processing cycles.

Properties

Physical Form: Solid

Product families

Applications

Consumer Goods — Other Consumer Goods Applications

Electrical & Electronics — Devices & Assemblies

Consumer Electronics

Printing & Packaging — Packaging

Healthcare Packaging
Non-Food Consumer Packaging

Product Families

Plastics — Basic Thermoplastics

Styrenics

Other characteristics

Brand: Dioki GPPS
Polymer Name: General Purpose Polystyrene (GPPS)
Melt Flow Index: 11.0 - 11.0 g/10 min
Processing Methods: Injection Molding
Markets: Consumer Goods
Electrical & Electronics
Printing & Packaging
PACKAGING: DİOKİ GPPS 603® is packed in polyethylene bags of 25 kg on wooden pallets having dimensions of 110x130 cm as 1 pallet net 1.375 kg. (Depend on the costumers demand, net 1.250 kg bigbag can be supplied) The pallets are covered and secured with stretch film.
Application: XPS, Manufacture of injection molded, thin-walled, general purpose products, internal refrigerator parts, toys, packaging in cosmetics and medicine, toys.
Technology: Plastics
Packaging Type: Bags
Material Features: Excellent Melt Flow
Excellent Transparency Properties
General Purpose
Good Optical Properties
Good Processability
Shorter Cycle Time
Storage and Handling: DİOKİ GPPS 603® should be protected from direct sunlight and rain/water. If possible, it should stored in dry, cool and closed area.
Plastics and Elastomers End Uses: Cosmetic Packaging
General Purpose
Medical Packaging
Medical/Healthcare Applications
Pharmaceutical Packaging
Toys
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 4

6 rows

Characteristic	Value	Unit	Method
Elongation at Break	1,2	%	ASTM D 638
Izod Impact Resistance, Notched (23°C)	11,5	J/m	ASTM D 256
Modulus	3120	MPa	ASTM D 790
Strength	72	MPa	ASTM D 790
Strength at Break	37,5	MPa	ASTM D 638
Tensile Modulus	3150	MPa	ASTM D 638

Table 2 of 4

2 rows

Characteristic	Value	Unit	Method
Heat Distortion Temp. (Metot B, 0.45 MPa)	82	°C	ASTM D 648
Vicat Softening Temperature (Rate B, 10N)	95	°C	ASTM D 1525

Table 3 of 4