AquaGraft® PEMC-1
- Chemical Family
- Polyolefins
AquaGraft® PEMC-1 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.
Properties
- Physical Form
- Pellets
- Solid
Product families
- Other Thermoset Elastomers
Other characteristics
- Brand
- AquaGraft
- End Uses
Appliance Wire Insulation, Appliance Wire Jacketing, Appliances, Automotive Components, Cables, Communication Cable Jacketing, Low Voltage Insulation, Wires
- Features
Cost Effective, Crosslinkable, Good Electrical Properties, High Performance
- Polymer Name
- Crosslinked Polyethylene (XLPE / PEX)
- Processing Methods
- Extrusion
- Type
- Low Voltage Polyolefin Base
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Storage
A high level of care in storage to minimize exposure to moisture is recommended to ensure that there is no degradation of the PEMC-4. Once opened, PEMC-4 should be consumed immediately to avoid any premature gelling due to environmental moisture.. To ensure health and safety, Material Safety Data Sheets (MSDS) are available and should be consulted prior to use.
- PACKAGING
- 1500 pounds (680.4 Kg) per box
- 200 pounds (90.7 Kg) per fiber drum
- Foil Liners
- Cure
- Moisture Cure
- Technology
- Elastomers
- Packaging Type
- Boxes
- Drums
- Specifications
When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with the correct ratios AquaGraft® PEMC-1 and FMB Masterbatch/CMB-432 will comply with the requirements as specified in the following standards: UL 44 for: XHHW, XHHW-2 SIS, USE, USE-2 UL/CSA AWM applications up to 150C Horizontal Flame * VW-1 on larger cable sizes * *(When used with appropriate level of FR master-batch)
- Labeling Claims
- Halogen-free
- Quality Standards
- ISO 6722 Class A
- SAE J1128
- UL 44
- Material Features
- Cost Effective
- Crosslinkable
- Good Electrical Properties
- High Performance
- Chemical Inventories
- TSCA (USA)
- Certifications and Compliance
- RoHS Compliant
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Specific Gravity | 0.92 | g/cm³ |
| Tensile Strength | 2400 | psi |
| Elongation | 360 | % |
| Hot Creep Elongation | 60 | % |
Table 2 of 2
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Retained Elongation (7 Days in 121°C Air Oven) | 100 | % |
| Retained Elongation (7 Days in 136°C Air Oven) | 100 | % |
| Retained Elongation (7 Days in 158°C Air Oven) | 90 | % |
| Retained Tensile (7 Days in 121°C Air Oven) | 105 | % |
| Retained Tensile (7 Days in 136°C Air Oven) | 105 | % |
| Retained Tensile (7 Days in 158°C Air Oven) | 110 | % |
