AquaGraft® 7020
- Chemical Family
- Ethylene-Propylene Copolymers (EPR)
AquaGraft® 7020 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties
Properties
- Physical Form
- Pellets
- Solid
Product families
- Building Wires & Power Cables
- Data Communication Cables
- Jacketing & Insulation
- Optical Fiber & Telecom
- Power Transmission & Distribution
Other characteristics
- Brand
- AquaGraft
- Density
- 1450.0 - 1450.0 kg/m³
- Polymer Name
- Ethylene Propylene Copolymer
- Additives Included
- Flame Retardant
- Processing Methods
- Extrusion
- Type
- HFFR Polyolefin Insulation/Jacket
- Markets
- Electrical & Electronics
- Storage
A high level of care in storage to minimize exposure to moisture is recommended to ensure that there is no degradation of the CMB 6001. Once opened, CMB-6001 should be consumed immediately to avoid any premature gelling due to environmental moisture.
- Handling
To ensure health and safety, Material Safety Data Sheets (MSDS) are available and should be consulted prior to use.
- PACKAGING
- 2200 pounds (997.9 Kg) per box
- 200 pounds (90.7 Kg) per fiber drum
- PE Liners
- Use within 12 months of manufacturing date
- Cure
- Moisture Cure
- Technology
- Elastomers
- Certification
Certified Test Results including physical test data are included with each shipment.
- Packaging Type
- Boxes
- Drums
- Specifications
When extruded and cured consistent with standard safe and acceptable wire and cable industry practices, cable insulated with AquaGraft® 7020 is designed to comply with the requirements as specified in the following standards. It is important to note that overall cable construction plays an important role in flame, fluid, and electrical performance. IEEE 383/UL-1685 IEEE 1202 – FT2 Flame Exposure ICEA S-73-532/ NYC Transit TUV 2Pfg1169:2007 EN 50618:2014
- Labeling Claims
- Halogen-free
- Natural
Technical data
Table 1 of 2
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Elongation | 200 | % |
| Specific Gravity | 1.45 | g/cm³ |
| Tear Resistance | 43 | lbs/in |
| Durometer (Shore A) | 98 | — |
| Tensile Strength | 1900 | psi |
Table 2 of 2
11 rows| Characteristic | Value | Unit |
|---|---|---|
| Elongation at Break (1n Oxalic Acid Solution 168 Hours at 23ºC) | 209 | % |
| Elongation at Break (1n Oxalic Acid Solution 168 Hours at 23ºC) | 207 | % |
| Hot Creep Elongation (15 Minutes at 150°C) | 45 | % |
| Hot Creep Elongation (15 Minutes at 150°C) | 56 | % |
| Hot Creep Elongation (15 Minutes at 150°C) | 36 | % |
| Retained Elongation (7 Days in 150°C Air Oven) | 80 | % |
| Retained Elongation (902 Oil - 4 Hours 70°C) | 99 | % |
| Retained Tensile (1n Sodium Hydroxide Solution 168 Hours at 23ºC) | 101 | % |
| Retained Tensile (7 Days in 150°C Air Oven) | 110 | % |
| Retained Tensile (902 Oil - 4 Hours 70°C) | 8 | % |
| Retained Tensile(1n Oxalic Acid Solution 168 Hours at 23ºc) | 96 | % |
