AquaGraft® 2-5150
AquaGraft® 2-5150 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties
Properties
- Physical Form
- Pellets
- Solid
Other characteristics
- Brand
- AquaGraft
- End Uses
Appliance Wire Insulation, Appliance Wire Jacketing, Appliances, Automotive Components, Cables, Low Voltage Insulation, Wires
- Features
Cost Effective, Crosslinkable, Flame Retardant, Flexible, Good Electrical Properties, High Performance
- Polymer Name
- Crosslinked Polyethylene (XLPE / PEX)
- Processing Methods
- Extrusion
- Type
- Low Voltage FR Polyolefin Insulation
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Storage
A high level of care in storage to minimize exposure to moisture is recommended to ensure that there is no degradation of the EPMC-2. Once opened, EPMC-2 should be consumed immediately to avoid any premature gelling due to environmental moisture.
- Handling
To ensure health and safety, Material Safety Data Sheets (MSDS) are available and should be consulted prior to use.
- PACKAGING
- 2200 pounds (997.9 Kg) per box
- 200 pounds (90.7 Kg) per fiber drum
- PE Liners
- Use within 12 months of manufacturing date
- Cure
- Moisture Cure
- Technology
- Elastomers
- Certification
Certified Test Results including physical test data are included with each shipment.
- Packaging Type
- Boxes
- Drums
- Specifications
When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with the correct component ratios will comply with the requirements as specified in the following standards: ISO 6722 SAE J1127 FT-2 Flame Rating, UL Horizontal Flame
Technical data
Table 1 of 2
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Hot Creep Elongation | 25 | % |
| Specific Gravity | 1.05 | g/cm³ |
| Tensile Strength | 1800 | psi |
Table 2 of 2
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Retained Elongation (7 Days in 180°C Air Oven) | 100 | % |
| Retained Tensile (7 Days in 180°C Air Oven) | 100 | % |
