To catalogue
AquaGraft® 16-6010
Aquagraft® 16-6010 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties
Properties
- Physical Form
- Pellets
- Solid
Other characteristics
- Brand
- AquaGraft
- Density
- 1300.0 - 1300.0 kg/m³
- Polymer Name
- Ethylene Propylene Copolymer
- Additives Included
- Flame Retardant
- Processing Methods
- Extrusion
- Type
- Low Voltage FR Polyolefin Insulation
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Storage
A high level of care in storage to minimize exposure to moisture is recommended to ensure that there is no degradation of the PEMC-1. Once opened, PEMC-1 should be consumed immediately to avoid any premature gelling due to environmental moisture.
- Handling
To ensure health and safety, Safety Data Sheets (SDS) are available and should be consulted prior to use.
- PACKAGING
- 2000 pounds (907.2 Kg) per box
- 250 pounds (113.4 Kg) per fiber drum
- PE Liners
- Use within 12 months of manufacturing date
- Cure
- Moisture Cure
- Technology
- Elastomers
- Certification
Certified Test Results including physical test data are included with each shipment.
Technical data
Table 1 of 2
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Elongation | 400 | % |
| Specific Gravity | 1.3 | — |
| Tensile Strength | 1973 | psi |
Table 2 of 2
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Retained Elongation (7 days in 121°C air oven) | 90 | % |
| Retained Elongation (7 days in 158°C air oven) | 91 | % |
| Retained Elongation (902 Oil Immersion - 96 hours at 100°C) | 56 | % |
| Retained Tensile (7 days in 121°C air oven) | 100 | % |
| Retained Tensile (7 days in 158°C air oven) | 98 | % |
| Retained Tensile (902 Oil Immersion 96 hours at 100°C) | 66 | % |
