CableFill® 300
- Chemical Family
- Polyolefins
CableFill® 300 bedding compound for wire and cable applications is:ExtrudableFlexibleEasy peelFree flowingFlame-retardantHalogen free
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
- Jacketing & Insulation
- Power Transmission & Distribution
Product Families
- Thermoplastic Olefin Elastomers (TPO)
Other characteristics
- Brand
- CableFill
- Density
- 1700.0 - 1760.0 kg/m³
- Features
Cost Effective, Excellent Flexibility, Flame Retardant, Free Flowing, Good Electrical Properties, High Performance, Low Deformation Tendency, Water Resistant
- Polymer Name
- Thermoplastic Polyolefin (TPO)
- Processing Methods
- Extrusion
- Markets
- Electrical & Electronics
- Storage
CableFill® 200 containers should be stored at temperatures below 38 °C in a dry area to avoid massing of pellets. Product is recommended to be used within 6 months.
- Handling
To ensure health and safety, Material Safety Data Sheets (MSDS) are available and should be consulted prior to use.
- PACKAGING
- 2,200 pounds (998 Kg) per box.
- Processing
CableFill® 300 compound is engineered to be processed on conventional extrusion equipment. Metering screw with 2.5-3:1 compression ratio in 15/1 through 20/1 extruders should produce satisfactory results. The compound supplied is in the cleanest state and is of the highest quality; however, the use of a breaker plate with a 10-20 mesh screen pack may be recommended to ensure optimal rheological flow and steady back pressure.; Pre-drying of the compound is not necessary, provided that the compound has been stored unopened in a cool, dry area. The following conditions are given as a guide for processing (single extrusion):; Temperature Profile; °F; °C; Screw:; 140-150; 60-65; Zone 1 (feed):; 160-170; 71-77; Zone 2:; 165-175; 74-80; Zone 3:; 170-180; 77-82; Zone 4:; Crosshead:
- Technology
- Elastomers
- Certification
Certified Test Results including physical test data are included with each shipment.
- Packaging Type
- Boxes
- Labeling Claims
- Halogen-free
- Quality Standards
- ISO 6722 Class A
- SAE J1128
- Additives Included
- Flame Retardant
- Material Features
- Cost Effective
- Excellent Flexibility
- Flame Retardant
- Free Flowing
- Good Electrical Properties
- High Performance
- Low Deformation Tendency
- Water Resistant
- Chemical Inventories
- TSCA (USA)
- Certifications and Compliance
- RoHS Compliant
- Plastics and Elastomers End Uses
- Cables
- Flame Retardant Insulation
- Industrial Cable Insulation
- Shipboard Cable Jacketing
- Wires
- Plastics and Elastomers Processing Methods
- Extrusion
Technical data
Table 1 of 1
2 rows| Characteristic | Value |
|---|---|
| Limited Oxygen Index | 36 |
| Specific Gravity | 1.70 - 1.76 |
