SILPURAN® 6610/60 A/B
- Chemical Family
- Silicones
SILPURAN® 6610/60 A/B is a paste-like, two-component compound. Its vulcanizates are noted for their significantly reduced tendency towards radical-induced reattachment, i.e., healing, of slit valve surfaces during sterilization by gamma irradiation and e-beam (≤ 75 kGy). SILPURAN® 6610/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.
Properties
- Physical Form
- Paste
Product families
Applications
- Medical Devices & Assemblies
Product Families
- Silicone Elastomers
Other characteristics
- Brand
- SILPURAN
- End Uses
Medical Devices, Medical/Healthcare Applications, Slotted Membranes, Valves
- Features
E-Beam Sterilizable, Excellent Surface Properties, Fast Curing, Food Contact Acceptable, Low VOC, Low Volatility, Radiation Sterilizable
- Polymer Name
- Liquid Silicone Rubber (LSR)
- Tear Strength
- 20.0 - 20.0 kN/m
- Note
Cure conditions: 5 min / 165 °C in press, post-cured 4 h / 200 °C
- Carrier
- Liquid Silicone Rubber (LSR)
- Markets
- Healthcare & Pharma
- Properties
SILPURAN® 6610/60 A/B meets selected test requirements of ISO 10993 and United States Pharmacopeia (USP) Class VI. It is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY including implantation for < 30 days and is particularly suitable for the economical production of large series of injection molded articles. At service temperatures above approx. 180°C the addition of heat stabilizers is recommended. Further information about an improvement of the heat stability by use of specific ELASTOSIL® Color Pastes FL can be obtained from the Technical Information Sheet "ELASTOSIL® Color Pastes FL" or the latest edition of our brochures.
- Technology
- Elastomers
- Packaging Type
- Pails
- Labeling Claims
- Food Contact Acceptable
- Specific Features
- Food-contact
- Less self-healing
- Reduced volatile content
- Material Features
- E-Beam Sterilizable
- Excellent Surface Properties
- Fast Curing
- Food Contact Acceptable
- Low VOC
- Low Volatility
- Radiation Sterilizable
- Storage Information
Once opened, containers should always be resealed after use to prevent the platinum catalyst from being poisoned by amines, sulfur or phosphorus compounds.
Technical data
Table 1 of 2
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Compression Set (at 22 hours, 175°C) | 15 | % | DIN ISO 815-1 type B method A |
| Density | 1.23 | g/cm³ | DIN EN ISO 1183-1 A |
| Elongation (at break) | 300 | % | ISO 37 Type 1 |
| Rebound Resilience | 50 | % | ISO 4662 |
| Shore Hardness A | 60 | — | DIN ISO 48-4 |
| Tear Strength | 20 | N/mm | ASTM D 624 B |
| Tensile Strength | 7 | N/mm² | ISO 37 Type 1 |
Table 2 of 2
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dynamic Viscosity (Shear rate 1 s⁻¹) | 500000 | mPa·s | DIN EN ISO 3219 |
| Dynamic Viscosity (Shear rate 10 s⁻¹) | 240000 | mPa·s | DIN EN ISO 3219 |
