SILRES® BS 1001
- Chemical Family
- Silanes, SiloxanesSilanesSiloxanes
SILRES® BS 1001 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 1001 serve as high-quality, general-purpose water repellents for impregnating and priming mineral surfaces. SILRES® BS 1001 can be combined with polymer-based primers for substrate consolidation.
Product families
- Concrete Coatings & Stains
Other characteristics
- Brand
- SILRES
- Functions
- Water Repellent
- Product Type
Primer, Solventless & High Solids Coating, Waterborne Coating; Primer; Solventless & High Solids Coating; Waterborne Coating
- Labeling Claims
- Environmentally Friendly, Solvent-free
- Environmentally Friendly
- Solvent-free
- Carrier
- Water
- Markets
- Paints & Coatings
- Coating Type
- Primer
- Waterborne Coating
- Technology
- CASE Ingredients
- Ready-to-Use Products
- Storage Information
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.; The more dilute they are, the more they tend to cream. However, this phase separation may be reversed by brief stirring or agitation. This will restore it to a homogeneous emulsion, without loss of efficacy.; SILRES® BS 1001 contains minor amounts of a preservative that protects the emulsion against microbial contamination and fungal attack. The quality of the water used may make it necessary to add a biocide after dilution; in principle, nearly any water-based preservative may be used.
Technical data
Table 1 of 1
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Active Content | approx. 50 | wt % |
| Density (at 20°C) | 0.95 | g/cm³ |
| Dynamic Viscosity (at 25°C) | approx. 12 | mPa·s |
