INOFLON® GN7500
- Chemical Family
- Fluoropolymers
INOFLON® GN7500 has high dielectric strength with good dimensional stability.
Properties
- Physical Form
- Granules
- Solid
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Cooling & Climate
- Fuel Systems
- Pipes & Plumbing
- Other Industrial Applications
- Tape & Label Adhesives
- Tapes & Labels
- Jacketing & Insulation
Product Families
- High Performance Thermoplastics
Other characteristics
- Brand
- GFL Americas INOFLON
- Polymer Name
- Polytetrafluoroethylene (PTFE)
- Processing Methods
- Extrusion
- Markets
- Adhesives & Sealants
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Technology
- Plastics
- Packaging Type
- Drums
- Labeling Claims
- PFOA-free
- HIGHLIGHTS
Fine Powder PTFE Resins are polymerized in an aqueous dispersion medium made from environmental friendly emulsifier, Fine Powder PTFE Resins are milky white polymers obtained from coagulating dispersions. Hydrocarbon oils are used for processing Fine Powder PTFE Resins. They offer an impressive array of following properties that makes them the material of choice for various demanding applications. Fine Powder PTFE Resins are PFOA/PFOS free.
- Material Features
Chemical Resistant; Dimensional Stability; Excellent Transparency Properties; Good Environmental Stress Crack Resistance (ESCR); Good Surface Finish; High Burst Strength; Highly Flexible; Improves Stick-Slip Response; Low Permeability; Weldable
- Important Properties
Good fibrillation; Good mechanical properties and ease of process ability; Chemically inert to most industrial chemicals and solvents; Low friction and non stick surface; High stress cracking resistance; Good transparency; High burst strength; Good surface finish; Good weldability; Low gas permeability; High flex life
- Certifications and Compliance
- ISO 14001
- ISO 45001
- ISO 9001
- Plastics and Elastomers End Uses
- Cables
- Hoses
- Pipe Liners
- Tape
- Tubing
- Wires
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Extrusion
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Bulk Density | 450.0 | g/l | ASTM D 4895 |
| Avg. Particle Size | 475.0 | μm | ASTM D 4895 |
| Extrusion Pressure (Reduction Ratio-400:1) | 28.0 | Mpa | ASTM D 4895 |
| Std. Specific Gravity | 2.175 | — | ASTM D 4895 |
| Tensile Strength | 30.0 | Mpa | ASTM D 4895 |
| Elongation at Break | 300.0 | % | ASTM D 4895 |
