To catalogue
INOFLON® 640
- Chemical Family
- Fluoropolymers
INOFLON® 640 has fine particle size with narrow distribution, high tensile and elongation and it is applied for general molding, skived film and sheet, compounding
Properties
- Physical Form
- Granules
- Solid
Product families
Applications
Automotive & Transportation — Automotive
- Other Automotive Applications
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
- Other Industrial Applications
Electrical & Electronics — Parts & Components
- Other Parts & Components
Product Families
Plastics — Engineering & Specialty Polymers
- High Performance Thermoplastics
Other characteristics
- Brand
- GFL Americas INOFLON
- Polymer Name
- Polytetrafluoroethylene (PTFE)
- Processing Methods
- Compression Molding, Injection Molding
- Note
- *GFL Internal Method
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Industrial
- Technology
- Plastics
- Packaging Type
- Drums
- Labeling Claims
- Food Contact Acceptable
- Material Features
- Chemical Resistant
- Flame Retardant
- Food Contact Acceptable
- Good Electrical Properties
- Good Mechanical Properties
- High Elongation
- High Tensile Strength
- Low Dielectric Constant
- Certifications and Compliance
- ISO 14001
- ISO 45001
- ISO 9001
- Plastics and Elastomers End Uses
- Bearings
- Gaskets
- Pipeline Bearing Pads
- Piston Rings
- Skived Films
- Standoff Insulators
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Compression Molding
- Injection Molding
- PTFE has an impressive array of following properties that makes it a material of choice for various demanding applications
Low dielectric constant and loss factor; Low coefficient of friction; Broad range of service temperature (-250°C to 250°C); Inherent UV resistance; Excellent chemical resistance; Low smoke and flammability resistance; FDA compliance for food contact
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Bulk Density | 325.0 | g/l | ASTMD 4894 |
| Avg. Particle Size | 23.0 | μm | ASTMD 4894 |
| Mold Shrinkage | 4.0 | % | ASTMD 4894 |
| Std. Specific Gravity | 2.155 | — | ASTMD 4894 |
| Melting Points | 321 - 342 | °C | ASTMD 4894 |
| Tensile Strength | 35.0 | Mpa | ASTMD 4894 |
| Elogations | 350.0 | % | ASTMD 4894 |
