To catalogue
INOFLON® M295
- Chemical Family
- Fluoropolymers
INOFLON® M295 has good flow high bulk density with good mold filling behavior and it is used in automatic and isostatic molding of parts, ram extrusion of rods and tubes.
Properties
- Physical Form
- Granules
- Solid
Product families
Applications
Automotive & Transportation — Automotive
- Chassis & Brake
- Other Automotive Applications
- Powertrain & UTH
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
- Other Industrial Applications
Electrical & Electronics — Parts & Components
- Other Parts & Components
Product Families
Plastics — Engineering & Specialty Polymers
- High Performance Thermoplastics
Other characteristics
- Brand
- GFL Americas INOFLON
- Polymer Name
- Polytetrafluoroethylene (PTFE)
- Processing Methods
- Compression Molding, Extrusion, Ram Extrusion
- Note
- *GFL Internal Method
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Industrial
- Technology
- Plastics
- Material Features
- Excellent Transparency Properties
- Flex Fatigue Resistant
- Free Flowing
- Good Barrier Properties
- Good Electrical Properties
- Good Mechanical Properties
- Good Mold Fillability
- Good Stretchability
- Certifications and Compliance
- ISO 14001
- ISO 45001
- ISO 9001
- Plastics and Elastomers End Uses
- Bellows
- Pipeline Bearing Pads
- Valve Seats
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Compression Molding
- Extrusion
- Ram Extrusion
- Modified PTFE is chemically modified and has following improved properties over virgin PTFE
- Reduced permeability
- Reduced deformation under load
- Good flexural fatigue resistance
- Smooth surface
- Higher transparency
- Weldability
- Higher di-electric strength
- Reduced stretch void index
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Bulk Density | 700.0 | g/l | ASTM D 4894 |
| Avg. Particle Size | 475.0 | μm | ASTM D 4894 |
| Mold shrinkage | 4.0 | % | ASTM D 4894 |
| Powder Flow | 400.0 | g/min | ASTM D 1895 |
| Std. Specific Gravity | 2.16 | — | ASTM D 4894 |
| Melting Points | 327 - 342 | °C | ASTM D 4894 |
| Tensile Strength | 30.0 | Mpa | ASTM D 4894 |
| Elongation | 400.0 | % | ASTM D 4894 |
