To catalogue
Extreme Industrial Lubricants TMG-2
TMG-2 by Extreme Industrial Lubricants is truly a heavy-duty-grease with extreme pressure properties, wide temperature range and extreme resistance to water wash conditions including salt fog, salt water, coolants and other contaminants such as dust, dirt and sand. Special additive technology and highly refined petroleum oils gives high film strength under difficult conditions with good oxidative and thermal stability.
Product families
Applications
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Automotive & Transportation — Lubricants & Functional Fluids
- Marine Fluids & Lubricants
Industrial — Oil, Gas & Mining
- Mining
Automotive & Transportation — Transportation
- Off Road & Recreational Vehicle (RV)
Product Families
Ready-to-Use Products — Fluids & Lubricants
- Greases
Other characteristics
- Features
Corrosion Resistant, Good Thermal Stability, Heavy Duty, High Strength, High Thermo-Oxidative Stability, Oxidation Resistant, Salt Water/Spray Resistant, Wear Resistant
- Product Type
- Grease
- Application Area
- Bearings, Bushings, Steel Mills
- Bearings
- Bushings
- Steel Mills
- Compatible Substrates & Surfaces
- Metal
- Markets
- Automotive & Transportation
- Industrial
- Technology
- Ready-to-Use Products
- Benefits and Features
- Clings to hot metals
- Protects against rust & corrosion
- Oxidation inhibitors
- Advanced EP additives
- Excellent anti-wear properties
- Excellent water resistance
- Increases life of parts
- Does not leak from joints
- Ready to Use Product Features
- Corrosion Resistant
- Good Thermal Stability
- Heavy Duty
- High Strength
- High Thermo-Oxidative Stability
- Oxidation Resistant
- Salt Water/Spray Resistant
- Wear Resistant
- Compatible Substrates and Surfaces
- Metal
Technical data
Table 1 of 1
16 rows| Characteristic | Value | Unit |
|---|---|---|
| Kinematic Viscosity of Base Oils (40°C) | 216.0 | cSt |
| Worked Penetration (60 Strokes, 25°C) | 268.0 | mm/10 |
| Mechanical Stability (P 100000 Strokes, % Change From P60) | 2.4 | % |
| Mechanical Stability (P 100000 Strokes, 50% H2O, % Change From P60) | 6.5 | % |
| Shell Roll Stability (% Change From P60) | 3.2 | % |
| Timken OK Load | 80.0 | lbs |
| 4-Ball EP Weld Load | 620.0 | kgf |
| LWI | 80.0 | — |
| 4 Ball Wear, Scar Dia (40kg Load, 1200 RPM, 75°C, 1h) | 0.38 | mm |
| Dropping Point | 583.0 | °F |
| Rust Test | Pass | — |
| Copper Corrosion | 1B | — |
