Extreme Industrial Lubricants SMG Gold
SMG Gold is truly a heavy-duty multipurpose EP grease designed for low or high-speed plain and rolling element bearings, and sliding mechanisms operating under generally difficult conditions such as those found in steel mills, manufacturing plants, and automotive applications. Special additive technology and highly refined petroleum oils give high film strength under EP conditions with good oxidative and thermal stability. A specially designed component mixture provides high dropping point, mechanical and thermal stability with heavy water and corrosion resistance. SMG Gold has exceptional resistance to water wash and extremely low oil bleed characteristics which ensures protection at high temperatures and high radial forces.
Product families
Applications
- Equipment & Parts
Product Families
- Greases
Other characteristics
- Features
Corrosion Resistant, Excellent Shear Strength, Good Thermal Stability, Hard Water Resistance, Heavy Duty, High Dropping Point, High Strength, High Temperature Strength, High Thermo-Oxidative Stability, Wash-Off Resistance
- Product Type
- Grease
- Application Area
Bearings, Pulp And Paper Mills, Rolling Mills, Steel Mills; Bearings; Pulp And Paper Mills; Rolling Mills; Steel Mills
- Markets
- Industrial
- Technology
- Ready-to-Use Products
- Benefits and Features
Increased Production - Increased parts life reduces downtime for repairs or parts replacement coupled with decreased labor to repair those parts. Increased production increases revenues.; Excellent Corrosion Protection - SMG Gold provides long life in corrosive environments.; Resistance to Water - These greases are insoluble in water.; High Extreme Pressure Properties - They will carry heavy loads due to inherent EP properties.; Excellent Shear Stability - Will not thin down due to heat or shear, even with heavy water wash.; Excellent Thermal Stability - May be used to 572°F with proper re-lubrication cycles.
- Ready to Use Product Features
- Corrosion Resistant
- Excellent Shear Strength
- Good Thermal Stability
- Hard Water Resistance
- Heavy Duty
- High Dropping Point
- High Strength
- High Temperature Strength
Technical data
Table 1 of 1
16 rows| Characteristic | Value | Unit |
|---|---|---|
| Kinematic Viscosity of Base Oils (40°C) | 118.0 | cSt |
| Worked Penetration (60 Strokes, 25°C) | 280.0 | mm/10 |
| Mechanical Stability (P 100000 Strokes, % Change From P60) | 2.4 | % |
| Mechanical Stability (P 100000 Strokes, 50% H2O, % Change From P60) | 6.5 | — |
| Shell Roll Stability (% Change From P60) | 3.2 | % |
| Timken OK Load | 80.0 | lbs |
| 4-Ball EP Weld Load | 620.0 | kgf |
| LWI | 80.0 | — |
| 4 Ball Wear, Scar Dia (40kg Load, 1200 RPM, 75°C, 1h) | 0.38 | mm |
| Dropping Point | 594.0 | °F |
| Rust Test | Pass | — |
| Copper Corrosion | 1B | — |
