RALUPOL® UP 2200
- Chemical Family
- Polyesters
RALUPOL® UP 2200 molding compounds are characterized by excellent dimensional stability with very low processing and post-shrinkage. Due to their high rigidity and excellent heat resistance, RALUPOL® products withstand short-term heat loads. They have excellent electrical insulation and dielectric properties, which are retained even with long-term use at high temperatures. The reason for this is high tracking resistance (CTI> 600 V), arc resistance, glow wire test (GWFI 960 ° C) and a high electrical RTI (relative temperature index) of 170 ° C according to UL 746 (IEC 60216 / T1).
Properties
- Physical Form
- Granules
- Solid
Product families
Applications
- Consumer Electronics
Product Families
- Polyesters
Other characteristics
- Brand
- RALUPOL
- Density
- 1900.0 - 2100.0 kg/m³
- End Uses
- Fittings
- Polymer Name
- Thermoset Polyester
- Processing Methods
- Injection Molding
- Markets
- Electrical & Electronics
- Supply Form
- Low dust granulate in moisture resistant bags
- Flame Rating
- UL 94 HB
- Technology
- Plastics
- Packaging Type
- Bags
- Fillers Included
- Organic
- Material Features
- Good Color Stability
- Good Electrical Properties
- Good Mechanical Properties
- Good Non-Yellowing Properties
- Low Shrinkage
- Superior Surface Quality
- Product Characteristic
Organically filled Polyester molding compound Low post-shrinkage, good electrical and mechanical properties, high surface quality and good color stability (non-yellowing) Primary application(s): Oven fittings This product meets the allowed upper limits for heavy metals and PCAs and also conforms to the requirements of the EU directives 2002/95 (RoHS), 2002/96 (WEEE) and 2006/122 (PFOS)
- Certifications and Compliance
PFOS - 2006/122/EC; RoHS Compliant; UL 94; Waste Electrical & Electronic Equipment Directive (WEEE)
- Plastics and Elastomers End Uses
- Fittings
- Plastics and Elastomers Functions
- Resin
- Handling Conditions
Keep cool and dry.Minimum shelf life at 20 ± 5 °C:6 months after date of delivery
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 4
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Compressive strength | 150 - 200 | MPa | ISO 604 |
| E-Modulus (flexural test) | 8 - 10 | GPa | ISO 178 |
| E-Modulus (tensile test) | 5 - 8 | GPa | ISO 527 |
| Flexural strength | 90 - 120 | MPa | ISO 178 |
| Impact strength (Charpy) | 7 - 12 | kJ/m² | ISO 179 / 1eU |
| Impact strength (Charpy), notched | 2,0 - 3,0 | kJ/m² | ISO 179 / 1eA |
| Tensile strength | 50 - 70 | MPa | ISO 527 |
Table 2 of 4
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Coeff. of linear thermal expansion (longitudinal,50-100°C) | 15 - 25 | 10-6 / K | ISO 11359-2 |
| Maximum application temperature (<50 h) | 190 | °C | IEC 60216/T1 |
| Flammability | HB / 1,6 | Stufe/mm | UL 94 |
| Maximum application temperature (20 000 h) | 130 | °C | IEC 60216/T1 |
| Thermal conductivity | 0,5 - 0,6 | W / m * K | ASTM E 1461 |
| Heat deflection temp. HDT A - 1,80 MPa | min. 110 | °C | ISO 75 |
| Heat deflection temp. HDT C - 8,00 MPa | 70 - 120 | °C | ISO 75 |
Table 3 of 4
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Moulding shrinkage (longitudinal) | 0,7 - 1,0 | % | ISO 2577 |
| Post shrinkage (168 h / 110 °C) | 0,1 - 0,4 | % | ISO 2577 |
| Specific gravity | 1.70 - 1.90 | g/cm³ | ISO 1183 |
| Water absorption (24 h / 23 °C) | max. 130 / max. 2,0 | mg / % | ISO 62 |
| Apparent Density | 0.75 - 1.00 | g/cm³ | ISO 60 |
Table 4 of 4
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Surface Resistance | 10^10 - 10^11 | Ohms | IEC 60093 |
| Tracking resistance (CTI) | 600 | V | IEC 60112 |
| Volume resistivity | 10^11 - 10^12 | Ω cm | IEC 60093 |
| Arc resistance | 4 | Stufe | ASTM D 495 |
| Dielectric strength | 20 - 30 | kV / mm | IEC 60243-1 |
