Big Dog Adhesives BD5425 Epoxy Adhesive
- Chemical Family
- Epoxy & Epoxy Derivatives
BD5425 is a two-part, unfilled room temperature cure, epoxy adhesive designed for bonding of metals, ceramics, and most plastics. It cures to a tough semi-rigid material, and is free flowing in viscosity. It gives good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is normally achieved at room temperature within 60 minutes with a full cure at room temperature within 24 hours. To accelerate the final cure, or to quicken the handling simply elevate the temperature.
Product families
- Other Adhesives & Sealants
Other characteristics
- Cure Method
- Air Dry
- Product Type
- 2K (2 component) Adhesive
- Compatible Substrates & Surfaces
- Ceramic, Metal, Plastics
- Shelf Life
- 12 Months
- Cure
- Air Dry
- Technology
- Ready-to-Use Products
- Handling
Bring both components to room temperature prior to mixing. Mix 1 part A to 1 part B thoroughly for 30 to 60 seconds.; Dispense mixed material over properly positioned devices to be glued together. Do not pour more than 1/2" thick as the product may exotherm too high and may boil. As this is a very quick adhesive, you must work quickly to bond the pieces together.; Parts may be shipped within 24 hours but parts can be moved in 1 hour.
- Chemical Inventories
- DSL (Canada)
- TSCA (USA)
- Certifications and Compliance
- ISO 9001
- Ready to Use Product Features
- Acid Resistant
- Alkali Resistant
- Excellent Salt Spray Resistance
- Free Flowing
- Good Solvent Resistance
- Good Toughness
- Water Resistant
- Compatible Substrates and Surfaces
- Ceramic
- Metal
- Plastics
Technical data
Table 1 of 3
1 row| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 7000 | cps |
Table 2 of 3
1 row| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 5000 | cps |
Table 3 of 3
17 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Working Time (at 75°F/ 24°C) | 20 - 30 | minutes | — |
| Fixture Time (at 75°F/ 24°C) | 4 | hours | — |
| Full Cure (at Room Temperature, For Full Properties) | 24 - 48 | hours | — |
| Operating Temperature | -40 to 302 (-40 to 150) | °F (°C) | — |
| Density (at Room Temperature, Mixed) | 9.5 (1.15) | lbs/gal (g/cc) | — |
| Flash Point (at Room Temperature) | min. 392 (min. 200) | °F (°C) | — |
| Mix Ratio (Part A:Part B) | 1:1 | — | — |
| Hardness (at Room Temperature) | 70 | — | Shore D |
| Lap Shear Strength (at Room Temperature, AL to AL) | min. 2,300 | psi | — |
| Tensile Strength (at Room Temperature) | 6500 | psi | — |
| Elongation (at Room Temperature) | 5 - 10 | % | — |
| Impact Resistance (at Room Temperature) | min. 150 | inch/lb | — |
