Big Dog Adhesives BD5460 Epoxy Adhesive
- Chemical Family
- Epoxy & Epoxy Derivatives
BD5460 is a two-part, epoxy hybrid room temperature cure adhesive designed industrial bonding, small potting and laminating where excellent strength and toughness, structural bonding, and mechanical and electrical properties are required. This 2-part adhesive cures at room temperature, exhibits good wetting, and develops high strength, low shrink bonds to most materials including fiberglass, ceramics, metals and many plastics. It has great dimensional stability over a wide range of temperatures. Fully cured bd5420 is a durable electrical insulator with resistance to water, weather, ozone and oxygen, various solvents, fuels, oils, alcohols, mild acids and alkalis and many other organic compounds including diesel fuel and gasoline. It is especially formulated for a 2:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is normally achieved at room temperature within 120 minutes with a full cure at room temperature within 24 hours. To accelerate the final cure, or to quicken the handling simply elevate the temperature.
Product families
Applications
- Potting Compounds
Product Families
- Structural Adhesives
Other characteristics
- Cure Method
- Air Dry
- Product Type
- 2K (2 component) Adhesive
- Compatible Substrates & Surfaces
- Ceramic, Fiberglass, Metal, Plastics
- Markets
- Electrical & Electronics
- Shelf LIfe
- 12 Months
- Cure
- Air Dry
- Technology
- Ready-to-Use Products
- Handling
Bring both components to room temperature prior to mixing. Mix 2 parts A to 1 part B by volume or 213 grams part a to 100 grams part B by weight thoroughly for 30 to 60 seconds.; Dispense mixed material over properly positioned devices to be glued together.; Parts may be shipped within 48 hours but parts can be moved in 4 hours.
- Chemical Inventories
- DSL (Canada)
- TSCA (USA)
- Certifications and Compliance
- ISO 9001
- Ready to Use Product Features
- Acid Resistant
- Alkali Resistant
- Dimensional Stability
- Excellent Strength
- Excellent Toughness
- Excellent Wetting Behaviour
- Fuel Resistant
- Gasoline Resistant
- Compatible Substrates and Surfaces
- Ceramic
- Fiberglass
- Metal
- Plastics
Technical data
Table 1 of 3
1 row| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 40000 | cps |
Table 2 of 3
1 row| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 80000 | cps |
Table 3 of 3
17 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Working Time (at 75°F/ 24°C) | 40 - 60 | minutes | — |
| Fixture Time (at 75°F/ 24°C) | 2 - 4 | hours | — |
| Full Cure (at Room Temperature, For Full Properties) | 24 - 48 | hours | — |
| Operating Temperature | -60 to 302 (-76 to 150) | °F (°C) | — |
| Density (at Room Temperature, Mixed) | 9.5 (1.15) | lbs/gal (g/cc) | — |
| Flash Point (at Room Temperature) | min. 392 (min. 200) | °F (°C) | — |
| Mix Ratio (Part A:Part B) | 2:1 | — | — |
| Hardness (at Room Temperature) | 75 - 80 | — | Shore D |
| Lap Shear Strength (at Room Temperature, AL to AL) | min. 3,700 | psi | — |
| Tensile Strength (at Room Temperature) | 6600 | psi | — |
| Elongation (at Room Temperature) | 2.5 | % | — |
| Impact Resistance (at Room Temperature) | min. 150 | inch/lb | — |
