SeamLock Acrylic Flowable Seaming Adhesive
- Chemical Family
- Methacrylates
SeamLock is a two-part methacrylate, flowable seaming adhesive designed for the inconspicuous bonding of various substrates, including solid surface (acrylic, polyester and blended products), granite, engineered stone, quartz, marble, cultured marble, glass, sintered stone, porcelain, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, SeamLock has a working time of 8 to 12 minutes and achieves nearly 90 percent of its ultimate strength in 20 to 25 minutes at room temperature curing. SeamLock provides high strength bonds to the above reference surfaces with generally no preparation effort. SeamLock adhesives are UV stable, and will not yellow over time.
Properties
- Uncured Physical Properties
- Mixer Recommendation Cartridge (250/500ml)
- MFQX 08-24T – Green/Orange 10:1
- Mixer Recommendation Cartridge (50ml)
- MBQX 05-24T – Pink/Gray 10:1 Tips
Product families
- Structural Adhesives
Other characteristics
- Brand
- SeamLock
- Cure Method
- Air Dry
- Product Type
- 2K (2 component) Adhesive, Seaming Adhesive
- 2K (2 component) Adhesive
- Seaming Adhesive
- Compatible Substrates & Surfaces
- Glass, Marble, Plastics, Stone
- Shelf Life
- 12 Months
- Cure
- Air Dry
- Technology
- Ready-to-Use Products
- Chemical Inventories
- DSL (Canada)
- TSCA (USA)
- Certifications and Compliance
- ISO 9001
- Safety and Health Precautions
SeamLock resin (Part A) and activator (Part B) are flammable. Contents include Methacrylate ester and acids. Keep containers closed after use. Wear gloves and safety glasses to avoid skin and eye contact. Wash with soap and water after skin contact. In case of eye contact, flush with water for 15 minutes and get medical attention. Harmful if swallowed. Keep out of the reach of children. Keep away from heat, sparks, and open flames. Do not smoke cigarettes or anything else while handling or near the product. Refer to the SeamLock Safety Data Sheet for more complete safety instruction.
- Ready to Use Product Features
- Acid Resistant
- Alkali Resistant
- Chemical Resistant
- Excellent Flowability
- Excellent Food Resistance
- Good Bonding Strength
- Good Non-Yellowing Properties
- Good UV Stability
Technical data
Table 1 of 4
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity (Uncured) | 20,000 - 60,000 | cps |
| Density (Uncured) | 8.2 | lbs/gal |
| Mix Ratio (wt or vol, Uncured) | 10 | — |
Table 2 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength (Fiberglass Surfaces) | min. 2,500 | psi | ASTM D638 |
| Tensile Strength (Acrylic Sheeting) | min. 1,000 | psi | ASTM D638 |
| Tensile Strength (Polycarbonate Sheeting) | min. 1,000 | psi | ASTM D638 |
Table 3 of 4
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity (Uncured) | 10,000 to 30,000 | cps |
| Density (Uncured) | 8 | lbs/gal |
| Mix Ratio (wt or vol, Uncured) | 1 | — |
Table 4 of 4
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Working Time (at 75°F/ 24°C) | 8 - 12 | minutes |
| Fixture Time (at 75°F/ 24°C) | 20 - 25 | minutes |
| Can be Moved In (at Room Temperature) | 30 | minutes |
| Operating Temperature | 65 - 85 (18 - 30) | °F (°C) |
| Gap Filling (at Room Temperature) | 0.25 | inches |
| Mixed Density (at Room Temperature) | 8.1 (0.96) | lbs/gal (g/cc) |
| Flash Point (at Room Temperature) | 51 (11) | °F (°C) |
