Big Dog Adhesives BD422FX Structural Methacrylate Adhesive
- Chemical Family
- Methacrylates
BD422FX is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD422FX has a working time of 18 to 24 minutes and achieves nearly 90 percent of its ultimate strength in 35 to 50 minutes at room temperature curing. BD422FX provides high strength and very flexible bonds to the above reference surfaces with generally no preparation effort. BD422FX bonds very strongly to steel, stainless steel, and aluminum metals and will allow a great deal of movement of the substrates due to coefficient of thermal expansion differences. BD422FX adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.
Properties
- Uncured Physical Properties
Mixer Recommendation Cartridge (250/490ml) : MFQX 08-24T – Square 24 element, Orange/Green Mix Tips (10:1)
Product families
Applications
- Structural Components
Product Families
- Structural Adhesives
Other characteristics
- Cure Method
- Air Dry
- Product Type
- 2K (2 component) Adhesive
- Compatible Substrates & Surfaces
Aluminum, Fiberglass, Metal, Plastics, Stainless Steel, Steel
- Markets
- Building & Construction
- Shelf LIfe
12 Months. The shelf life of BD422FX is twelve (12) months from the date of manufacture based upon continuous storage at room temperature (77°F or 25°C). Storage of BD422FX adhesives in refrigerated compartments will extend the shelf life even more. Do not store BD422FX adhesive or any other adhesives in a refrigerator which has food or lunch products in them. Be sure to bring BD422FX adhesives to room temperature for 24 hours before use, otherwise longer cure and fixture times may be expected. Long-term storage at temperatures above room temperature will shorten the shelf life of BD422FX adhesives considerably. Storage at temperatures above 100°F or 38°C could shorten the shelf life to less than one month. BD422FX adhesives contain no water, so freezing of the adhesive for short periods is permissible, but is not encouraged.
- Cure
- Air Dry
- Technology
- Ready-to-Use Products
- Chemical Resistance
- Excellent Resistance to :
- Hydrocarbons
- Acids and Bases
- Vinegar
- Wine and Condiments
- Most Household Foods
- Susceptible to :
- Polar Solvents
- Chemical Inventories
- DSL (Canada)
- TSCA (USA)
- Certifications and Compliance
- ISO 9001
- Safety and Health Precautions
BD422FX resin (Part A) and activator (Part B) are flammable. Contents include Methacrylate ester and acids. Keep containers closed after use. Wear gloves and safety glasses to avoid skin and eye contact. Wash with soap and water after skin contact. In case of eye contact, flush with water for 15 minutes and get medical attention. Harmful if swallowed. Keep out of the reach of children. Keep away from heat, sparks, and open flames. Do not smoke cigarettes or anything else while handling or near the product. Refer to the BD422FX Safety Data Sheet for more complete safety instruction.
- Ready to Use Product Features
- Acid Resistant
- Alkali Resistant
- Chemical Resistant
- Excellent Food Resistance
- Flexible
- Good Bonding Strength
- High Strength
- Hydrocarbon Resistant
- Compatible Substrates and Surfaces
- Aluminum
- Fiberglass
- Metal
- Plastics
- Stainless Steel
- Steel
Technical data
Table 1 of 4
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity (Uncured) | 120,000 - 160,000 | cps |
| Density (Uncured) | 8.2 | lbs/gal |
| Mix Ratio (wt or vol, Uncured) | 10 | — |
Table 2 of 4
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength (Fiberglass Surfaces) | min. 2,500 | psi | ASTM D638 |
| Tensile Strength (ABS/PVC Sheeting) | min. 1,000 | psi | ASTM D638 |
| Tensile Strength (Steel/Stainless Steel) | 2,500 - 3,500 | psi | ASTM D638 |
| Tensile Strength (Aluminum) | 2,500 - 3,500 | psi | ASTM D638 |
Table 3 of 4
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity (Uncured) | 50,000 - 100,000 | cps |
| Density (Uncured) | 8.5 | lbs/gal |
| Mix Ratio (wt or vol, Uncured) | 1 | — |
Table 4 of 4
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Working Time (at 75°F/ 24°C) | 18 - 24 | minutes |
| Fixture Time (at 75°F/ 24°C) | 35 - 50 | minutes |
| Can be Moved In (at Room Temperature) | 45 - 60 | minutes |
| Operating Temperature | 65 - 85 (18 - 30) | °F (°C) |
| Gap Filling (at Room Temperature) | 0.5 | inches |
| Mixed Density (at Room Temperature) | 8.1 (0.96) | lbs/gal (g/cc) |
| Elongation (at Room Temperature) | min. 100 | % |
| Flash Point (at Room Temperature) | 51 (11) | °F (°C) |
